Target 2 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 30 mm, 100 Pk. Disposable: Yes: Material: PTFE (Hydrophilic) Material (Membrane) PTFE (Hydrophobic) Pore Size: 0.2 μm: Sterility: Non-sterile: For Use With (Application) HPLC, SPE: Hold up Volume (After Air Purge) <157 μL: Housing Material: Medical Grade, Solvent-Resistant, Virgin
Sartofluor GA Cartridge,0.2µm,20. Sartofluor ® is the solution for all applications where sterile air is needed. A single-layer PTFE membrane construction ensures validated sterility, while providing maximum flow rate over a wide range of operating conditions. The optimal performance-to-cost ratio allows benefiting from the lowest cost-of
Durable laminated PTFE membranes are unaffected by even the most corrosive compounds, including concentrated acids, alkaline, and propellants. Membranes withstand temperatures from –100 to 130°C (–148 to 266°F). Use these hydrophobic membranes for sterile venting and filtration of gas, air steams, and organic solvents.
Membrane Filters Use Filtration, Testing, Venting Ordering Information Custom roll, sheet, and disc sizes available upon request. Please contact your local sales representative for additional information. Supported PTFE Reviews We appreciate and value your feedback.
0.2 µm Membrane Material Double Layer PTFE Effective Filtration Area (Metric cm²) 4000 cm² Filter Cartridge Style Code 2 Cartridge Length (Imperial) 5 in Cartridge Length (Metric) 127 mm See All Attributes Emflon® PFRW Filter Cartridge, AB1PFR8WH4 Product ID AB1PFR8WH4 Unit of Measure 1/EA Min Order Qty 1 Removal Rating 0.2 µm Membrane Material
PTFE Laminated Membrane Filters, 0.2 Micron, 47mm, 100/Pk. PTFE Laminated Membrane Filters, 0.20 micron, 47 mm, pack of 100. Hydrophobic, durable ePTFE laminated on to a polypropylene later. Ideal for venting, phase seperations, and aerosol sampling.
Whatman PTFE membranes from Cytiva are strong hydrophobic membrane filters resistant to the corrosive solvents and aggressive media used in gas sterilization* and liquid clarification. Polypropylene grid support material for increased strength Temperature resistant up to 120°C Resistant to most aggressive acids, alkalis, and solvents
Membrane filters typically have absolute pore size ratings <1µm, with some exceptions. Because of their very fine pore structure, membrane filters tend to trap the majority of particles on the surface. However, smaller particles with diameters near or below the pore size rating can be captured within the membrane or pass through the membrane.
0.2 Micron Standard-Grade PTFE Membrane Liquid Filter Cartridges w/Flat End Cap, Encapsulated Silicone O-Ring Gasket, 2.7" x 30" Filter Cartridges for High Purity Filtration and Superior Chemical Resistance This 0.2 micron standard grade 2.7" x 30" filter cartridge with expanded PTFE membrane and a flat end cap offers high purity filtration.
Teflo Membrane: TF (PTFE) Membrane: Filter Media/Support: PTFE with PMP (polymethyl-pentene) support ring: PTFE on a polypropylene support: Typical Thickness: 1 μm: 76 μm (3 mils) 2 μm: 46 μm (1.8 mils) 3 μm: 30.4 μm (1.2 mils) 0.2 μm: 139 μm (5.5 mils) 0.45 and 1 μm: 135 μm (5.3 mils) Typical Air Flow Rate L/min/cm2 at 0.7 bar (70
Whatman PTFE membrane filters from Cytiva's business are chemically stable and inert, making them suitable for use with aggressive organic solvents, strong acids, and alkalis. The TE range features polypropylene support material for improved strength and handling. Temperature resistant up to 120°C. Can withstand aggressive solvents, liquids
3 products. Grainger brings a host of lawn membrane filters. All of our membrane filters are suitable for air and liquid filtration. Our collection is available in a unique set of materials, from binderless glass microfiber to cellulose nitrate and other types. Lawn membrane filters are compatible with various chemicals and operate through various strengths.
Able to filter solutions at temperatures up to 100°C Convenient and Easy to Use Color coding makes it easy to select the correct membrane and pore size Packed in re-usable rigid transparent color-coded containers Syringe filters can be sterilized by autoclave at 125°C for 15 minutes
Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high Related Products: Hydrophobic Filter Compare this item
ptfe 0.2 um filter " within Products Sort by Relevance All Photos ( 1) Milli-DI® 0.2 μm Filter Adapter Match Criteria: Product Name, Keyword All Photos ( 2) BRAND® macro pipette controller membrane filters 3 μm (PP,PTFE) Match Criteria: Product Name, Keyword All Photos ( 2) Aervent®-50 Filter Unit 0.2 µm hydrophobic 1/4 in. HB/HB
