GVHP14250. Trade Name. Durapore ®. Description. Durapore® Membrane Filter, 0.22 µm. Background Information. Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes. Features & Benefits.
MilliporeSigma™ Durapore™ Membrane Filters, 0.22 μm. Recommended when maximum recovery is important. Durapore™ PVDF Membranes: 0.22μ Pore Size provide high flow rates and throughput, low extractables, broad chemical compatibility and low protein binding. Available in diameters ranging from 13mm to 142mm. Manufacturer: MilliporeSigma
Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 μm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 μm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
Fluoropore membranes provide broad chemical compatibility, high flow rates and consistency. (Please note that catalogue numbers containing "FHUP" are unlaminated, or produced without a backing.) Our Omnipore membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions.
Durapore ®. Description. Durapore® Membrane Filter, 0.22 µm. Background Information. Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes. Features & Benefits.
Oct 21, 2021 · Corning® bottle-top vacuum filters cellulose acetate membrane, sterile, pore size 0.22 μm, membrane diam. 70 mm, funnel capacity 500 mL, case of 12; Synonyms: bottle top filters,vacuum system filters,laboratory filters; find -CLS430513 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
Brand Name Millipore Express® PLUS Membrane Membrane Material Polyethersulfone (PES) Pore Sizes (µm) 0.22, 0.45 Thickness (µm) 130 - 185 Water Flow Rate (mL/min/cm2) @27.5 in. Hg 27 to greater than 44 Wettability Hydrophilic Protein Binding Capacity (IgG) 22 µg/cm2 Chemical Compatibility Recommended for aqueous solvents
Solvex hydrophobic 0.22 μm solvent filtration products provide validated, robust and cost-effective solvent filtration. Millipore Solvex brand cartridge filters combine high-performance polytetrafluoroethylene (PTFE) membranes with a robust cartridge design to deliver validated, reliable sterile filtration and efficient particulate removal.
MilliporeSigma™ Durapore™ Membrane Filters, 0.22 μm Recommended when maximum recovery is important. Durapore™ PVDF Membranes: 0.22μ Pore Size provide high flow rates and throughput, low extractables, broad chemical compatibility and low protein binding.
Durapore® Membrane Filter, 0.22 µm. Background Information. Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes. Features & Benefits.
Solvex hydrophobic 0.22 μm solvent filtration products provide validated, robust and cost-effective solvent filtration. Millipore Solvex brand cartridge filters combine high-performance polytetrafluoroethylene (PTFE) membranes with a robust cartridge design to deliver validated, reliable sterile filtration and efficient particulate removal.
Sterile syringe filters 0.22 um | Sigma-Aldrich This 33 mm syringe filter with a Hydrophilic Polyethersulfone membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.22 µm pore size used in preparation of aqueous solutions prior to chromatography or other instrument analyses.
Choose a filter or membrane based on: 1) Chemical compatibility of the membrane and housing with your sample matrix. 2) Size and amount of particulates in the sample. 3) Potential interactions (binding) between the membrane and sample components. 4) Special considerations such as requirement for prefilter or inorganic ion certification.
Yes, the Ultrafree MC/CL is available is with a either a 0.22um or 0.45um "LCR" hydrophilic PTFE membrane. These products are available in packages of twenty-five units under the following catalog numbers: 0.22 micron - UFC3 0LG 25 and 0.45 micron - UFC3 0LH 25.
