Filter Media Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow RatemL/min/cm 2 at 0.7 bar (70 kPa, 10 psi) 0.2 µm: 20 0.45 µm: 31 Maximum Operating Temperature
Details. PTFE Disposable Vent Filter, 0.2 Micron, 50 mm, 7-13mm Hose Barb connection, 10/PK (50JP020AN) Sterile venting of filling vessels, including culture vessels and CO2incubators. Venting of holding tanks for sterile, distilled water and liquid culture media. Autoclave venting.
Description. Pall AcroPrep Advance Filter Plates for Solvent Filtration - 1 mL, 0.2 µm PTFE membrane (5/pkg) “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications.
Membrane integrity for syringe filters was tested by bubble point. This chart is intended only as a guide. Accuracy cannot be guaranteed. Users should verify chemical compatibility with a specific filter under actual use conditions. Because chemical compatibility
PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 µm and 0.5 µm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 µm membranes. WTP and TE membrane ranges WTP membranes
Acrodisc® Syringe Filters with PTFE Membrane - 0.2 µm (50/pkg 200/cs) Product ID: AP-4225 Product ID AP-4225 Unit of Measure 1/PAC Min Order Qty 1 Pore Size 0.2 µm Filter Size 25 mm
4423 Acrodisc CR PTFE, 0.2 µm, 13 mm 100/300 4553 Acrodisc CR PTFE Minispike, 0.45 µm, 13 mm 100/300 Filter Media: GHP: GH Polypro membrane (GHP, hydrophilic polypropylene) PTFE: Hydrophobic polytetrafluoroethylene membrane on a ® ...
Solvent Inlet Filter found in: SOLVENT INLET FILTER 20u, Solvent Inlet Filters, Solvent Inlet Filter 20um, 2/pack, Solvent Inlet Filter for Aijiren HPLC.. Class VI PTFE Manifold, chemically resistant Viton O-Ring & an Air Inlet Valve combined with a Foxx 25mm, 0.2µm PTFE Filter
Pall Acrodisc ptfe membrane filter 0.22 um online Syringe Filters PTFE syringe filters are hydrophobic and chemically resistant to all solvents, acids, and bases.
Pore Size (0.2 and 0.45 µm) — The filter pore size is usually a personal preference of the chromatographer but relates to the column packing material. Since there are many different packing materials, a general guideline is that most customers find that the 0.45 µm filter meets their requirements, although chromatographers are increasingly moving toward using 0.2 µm filters.
AcroPrep Filter Plates For Solvent Filtration, Pall Laboratory Microplates Filter Plates AcroPrep Advance filter plates are chemically compatible with harsh organic and / or aqueous solvents and contain inert materials of construction to provide a stable platform and ensure complete recovery of samples and low non-specific binding.
20/5/2020 · Leading supplier of PTFE membrane filter since 2007,any requirement about PTFE membrane filter,please contact Aijiren, Aijiren is a manufacturer specializing in providing PTFE membrane filter, GC Vial, HPLC Vial, etc. for chromatographic analysis experiments., GC Vial, HPLC Vial, etc. for chromatographic analysis experiments.
Alibaba.com offers 1571 pall 0.2 micron vent filter products. There are 1 pall 0.2 micron vent filter suppliers, mainly located in Asia. The top supplying countries or regions are pall 0.2 micron vent filter, China, and 100%, which supply {3}%, {4}%, and {5}% of {6
Membrane Filter Pvdf Membrane Filters PVDF PTFE 0.45 Um Micropore Roll Membrane Filter For Lab US $31.23 - $35.99 / Pack Get Quotation Pall Shop - Medical OEM PTFE Membrane - Liquid Barrier Our PTFE membrane has one of the best ratios of airflow
Filter Media wwPTFE (water wettable PTFE), TF (PTFE, hydrophobic polytetrafluoroethylene), PVDF (hydrophilic polyvinylidene fluoride), and Nylaflo (hydrophilic nylon) membranes Pore Size 0.2 and 0.45 μm Typical Thickness wwPTFE Membrane 0.2 μm: 280
