Pall Acrodisc Syringe Filters with PTFE Membrane, Pore Size 0.2 um, Diameter 13 mm, Pack of 1000 Acrodisc Syringe Filters with PTFE Membrane, Pore Size 0.2 um, Diameter 13 mm, Pack of 1000
Pall Acrodisc Syringe Filters with PTFE Membrane, Pore Size 0.2 um, Diameter 13 mm, Pack of 1000 Acrodisc Syringe Filters with PTFE Membrane, Pore Size 0.2 um, Diameter 13 mm, Pack of 1000
Description. Pall AcroPrep Advance Filter Plates for Solvent Filtration - 1 mL, 0.2 µm PTFE membrane (5/pkg) “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications.
The double-layer PES membrane provides low protein-binding, high throughput and broad chemical compatibility for your critical filtration processes. Memtrex MP-S filters are available with an absolute pore size micron rating of 0.2 μm.
Pore Size: 0.2 µm. Size: 37 mm. Effective Filtration Area: 7.5 cm 2. Typical Air Flow: 3.58 L/min at 0.2 bar (20 kPa, 3 psi) Sterilization: Provided non-sterile. Maximum Operating Temperature: 100 °C (212 °F) Maximum Operating Pressure: 4.1 bar (410 kPa, 60 psi) Use: Gas Filtration. Acro 37 TF Vent Device with PTFE Membrane is used in-line
Foxx Life Sciences EZBio® Vent Filters are used for hydrophobic venting and solvent filtration applications. The PTFE filter membrane is ideal for maintaining purified water stored in carboys, or for sterile venting during a slow exhaust/liquid autoclave cycle of EZgrip™ carboys.
Oct 21, 2021 · Feb 17, 2020 · PTFE Hydrophilic Syringe Filters 0.2 or 0.45um Resisting nearly all corrosive chemicals makes PTFE syringe filters an ideal choice. However, natural hydrophobic PTFE has it’s disadvantages not letting aqueous solutions passing through while many of these chemicals are diluted with water.
PTFE membrane filters have an excellent chemical compatibility (pH 1 to 14), so that they are also used for the filtration of solvents and acids, to which other filter types are not resistant. Moreover they can be used to filter aqueous solutions as well, but because of their hydrophobic characteristics, they must be pre-wetted with ethanol or methanol before the filtration of aqueous media solutions.
Fluoropore membranes provide broad chemical compatibility, high flow rates and consistency. (Please note that catalogue numbers containing "FHUP" are unlaminated, or produced without a backing.) Our Omnipore membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions.
PTFE is a hydrophobic membrane, so it will repel water and is not suitable for the filtration of aqueous solutions. As well as being suitable for the filtration of organic solvents in applications such as HPLC and UHPLC sample preparation, the hydrophobic nature of the PTFE membrane makes these syringe filters ideal to use in gas filtration or as a moisture barrier in venting applications.
Product Description. MS ® PTFE membrane media for filtration is made of PTFE (polytetrafluorothylene), and were drawn 2-demension. It is micro-pore film. The PTFE membrane was laminated with great variety of fabric and paper.
Hydrophilic PTFE Membrane Filters. Advantec MFS. Filter both aqueous and organic solvents Optically clear when wet Hydrophilic PTFE membranes are a thin, unsupported, highly porous film that offers maximum chemical and pH resistance to a broad range of aqueous and organic solvents. This membrane exhibits high flow rates with minimal.
Corning® 250 mL Vacuum Filter/Storage Bottle System, 0.22 µm Pore 19.6cm² PES Membrane, Sterile, 12/Case. Expected in-stock date: Feb 8, 2022:
Whatman 6875-1302 GD/X 13 mm Syringe Filter, PTFE filtration medium, 0.2 um (1500 pcs) Regular Price: $2,401.25 Price $2,088.05
Foxx Life Sciences. 25mm, 47mm, and 90mm membrane disc filters are used to retain particles or microorganisms by surface capture. The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Nylon membrane is has great chemical resistance and makes them ideal for filtering more aggressive solutions.
EZFlow® High Particulate Syringe Filters. …membrane along with a glass fiber pre-filter. The filter membrane is available in PES or Hydrophilic PVDF materials, offered in 0.2µm or 0.45µm pore sizes. The filter membrane is reinforced with a polypropylene housing with a female Luer-Lok inlet and a male Luer Slip outlet.
