Syringe Filter Housings Syringe filter housings are manufactured from solvent-resistant, low-extractable polypropylene resins specifically selected for wide compatibility with common HPLC sample matrices. Solutions at temperatures up to 100 C can be
Syringe Filter Housings Syringe filter housings are manufactured from solvent-resistant, low-extractable polypropylene resins specifically selected for wide compatibility with common HPLC sample matrices. Solutions at temperatures up to 100 C can be
Description of PTFE Pleated Membrane Filter Cartridges The PTFE filter cartridge adopts a hydrophobic PTFE membrane with a high flux and long service life. The wide chemical compatibility of the PTFE membrane makes the filter cartridge suitable for various acid and alkali-base solutions, and is widely used in the biopharmaceutical and electronics industries.
Millipore® membranes have supported laboratory filtration in academic, pharmaceutical, and industrial sectors since the 1950s. We provide a range of membrane chemistries including MF-Millipore® mixed cellulose esters, Durapore® PVDF, Millipore Express
Vent filters can provide a sterile barrier for air or gases entering or exiting vessels such as bioreactors, fermentation tanks, or carboys. These filters maintain the sterility of the interior environment and protect the atmosphere from contaminants within the vessel. Pall
Darlly 20 Inch Hydrophobic PTFE Membrane Micron Pleated 0.1um 0.22um 0.45um 1um Filter Cartridge Overview- ZMFT® PTFE Filter Cartridge (Hydrophobic) F1T Series ZMFT® F1T series filter cartridge is made of Hydrophobic PTFE membrane which has very good resistance to corrosion, therefore it is widely used for the filtration of strong acid, alkali and strong polar organic solvent.
Model PTFE Micron Rating End Adaptor Seal Length PTFE - PTFE Pleated Type 010:0.1μm 020:0.2μm 045:0.45μm CODE O - DOE Double Open End 7 - 226/Fin 8 - 222/Fin 3 - 222/Flat Closed 2 - 226/Flat Closed F - 215/Flat Closed S - O - Ring Insert/Flat E
NWF series cartridges filter media is a hydrophobic PTFE membrane, applicable to the pre-filtering and sterilization of gas and solvent. PTFE membrane has the strong hydrophobicity, its water erosion resistance capacity is 3.75 times stronger than the ordinary
4552 Acrodisc CR PTFE Minispike, 0.2 µm, 13 mm 100/300 4423 Acrodisc CR PTFE, 0.2 µm, 13 mm 100/300 4553 Acrodisc CR PTFE Minispike, 0.45 µm, 13 mm 100/300 4422 Acrodisc CR PTFE, 0.45 µm, 13 mm 100/300 4225 Acrodisc CR PTFE, 0.2 µm
5 Layered Filters with Pre-Filter Layered Filters, 100/pk Description Diameter (mm) Pore Size (µm) Certification Housing Part No. Glass microfiber/ PTFE 15 0.2 LC Polypropylene 5190-5126 15 0.45 LC Polypropylene 5190-5127 25 0.2 LC Polypropylene 5190-5128
PTFE Filter Cartridges. Rs 900/ Piece. Pleated Filter Cartridge. Rs 1,150/ Piece. High Efficiency 20" PP Pleated 0.45 Micron Filter Cartridge. Rs 1,150/ Piece. PTFE Pleated Cartridge. Rs 1,150/ Piece. Pleated Filters.
There is more uncertainty for absolute pore size ratings based on particle retention studies, especially for pore size ratings <0.2µm, since there are no standard methods for these studies. Regardless of pore size ratings, it is important to understand that application conditions do influence particle retention.
Filter elements and bags are available in a range of polymers and Stainless Steel. In addition, we can also supply fluoropolymer lined vessels for aggressive media and 100% PTFE elements and bags. Products for solvent filtration Bag filter housings and filter
226 Fin chemical filter cartridge for ink/solvent/mineral water purification Pleated membrane filter cartridge Introduction: Pleated membrane cartridge filters from Guangzhou Lvyuan Filter offer the ultimate in product safety and purity for absolute filtration with pore sizes from 0.05 to 100 micron (depending on the media).
Sterilizing Grade 0.2 Micron PTFE Membrane Filter Cartridge. SERENE Hydrophobic PTFE Sterilizing Grade 0.2um filter cartridges are highly retentive hydrophobic membrane designed for critical liquid and gas sterilization. Hydrophobic PTFE filter medium provides exceptionally high air flow rates at low differential pressures Naturally Hydrophobic
High quality Pleated membrane 0 2 micron ptfe filter, US $ 0.5 - 18.5 / Piece, Shanghai, China, Minipore, M-0060.Source from Shanghai Minipore Industrial Co., Ltd. on Alibaba
