0.2 µm, AcroPak 300 Vent Filter Capsule with PTFE Membrane Offers broad chemical compatibility with PTFE membrane and polypropylene housing; 100% integrity-tested to provide the high level of confidence you require “Pall Laboratory products are designed for laboratory applications only.
Porex® Fabrication Interstate Specialty Products die cuts Porex® materials and also has digital knife cutting capabilities. To learn how Porex® fabrication supports your application, contact us on-line or call (800) 984-1811. *Properties and applications shown
Membrana Omnipore, PTFE, hidrófila; 0,2 µm, 25 mm, color blanco, superficie lisa Información preliminar Our Fluoropore™ membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications.
Omnipore Membrane Filter 0.2 um pore size, Hydrophilic PTFE membrane, 47 mm diameter - Find MSDS or SDS, a COA, data sheets and more information. Description Catalogue Number JGWP04700 Trade Name Omnipore Description Omnipore Membrane Filter
PTFE filter membrane is resistant to most solvents Available in 0.05, 0.1, 0.2, 0.45, and 1.0 µm pore Related Products: Solvent Filtration Compare this item Syringe Filter, PVDF, 0.45µm, 30mm Diameter Denville the membrane, not leak around it. Denville
Omnipore Membrane Filter 0.2 um pore size, Hydrophilic PTFE membrane, 47 mm diameter - Find MSDS or SDS, a COA, data sheets and more information. Description Catalogue Number JGWP04700 Trade Name Omnipore Description Omnipore Membrane Filter
≤0.75 mL/min @ 2.6 bar (38 psig) per 10 in cartridge Nitrogen Diffusion at 23 C ≤24 mL/min @ 970 mbar (14 psig) in 70/30 % IPA/water Non-Fiber Releasing This product was manufactured with a PTFE membrane which meets the criteria for a "non-fiber
PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes
Omnipore Membrane Filter 0.2 um pore size, Hydrophilic PTFE membrane, 47 mm diameter; find Millipore-JGWP04700 MSDS, related peer-reviewed papers, technical documents, similar products &
Cellulose acetate filter has the characteristics of high flow rate, strong thermal stability, low adsorption, suitable for positive pressure filtration, hydrophilic good performance, uniform pore structure, and high flow rate, suitable for pH 3.5 – 8 aqueous solutions or other organic solvents such as oils, ethanol, etc., 0.22 μm CA filter
FAQs - FILTRATION What membrane filter pore size should I use for sterilization? Regardless of the membrane filter material, always use a 0.2 µm pore size membrane filter as the final filter for any sterilizing filtration. The 0.2 µm membranes used in Thermo
Minisart® SRP15 Syringe Filter 17558----------K, 0.2 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17558 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration and has a male spike outlet.
The membrane is peripherally bonded to an annular polypropylene ring (except the 13 mm diameter disc) for ease of handling and is suitable for both vacuum and pressure filtration Anopore is available in 3 nominal pore sizes: 0.02 µm, 0.1 µm, and 0.2 µm, and in
While POREX porous plastics are naturally hydrophobic, our porous plastic sheets can be made hydrophilic with a special treatment procedure. POREX porous plastic sheets are commonly used for filtering , diffusing , venting , wicking , fluidizing , air conveying or as membrane supports.
Pall® 4542 Acrodisc Syringe Filters with PTFE Membrane, Pore Size 0.2 µm, Diameter 13 mm, Pack of 1000 Filter Media: Hydrophobic PTFE Housing: Polypropylene Type: Syringe Filter Use: Particulate Filter, Instrument Protection Pore Size: 0.2 µm Effective
