Description. Integral hydrophobic PTFE venting membrane is resistant to harsh solvents. Can be autoclaved multiple times without loss of integrity. Integrity-testable (bubble point or water breakthrough pressure in situ methods) Lightweight: avoids the collapsing of tubing that can be caused by heavy filter devices.
Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.
Sterilizing Grade 0.2 Micron PES Membrane Filter Cartridge. SERENE Hydrophobic PTFE Sterilizing Grade 0.2um filter CAPSULES are highly retentive hydrophobic membrane designed for critical liquid and gas sterilization. Hydrophobic PTFE filter medium provides exceptionally high air flow rates at low differential pressures Naturally Hydrophobic Membrane also provides high assurance of filter integrity and long life, during high temperature venting application and during repeated steaming.
Ultradyne ® absolute-rated polytetrafluoroethylene (PTFE) membrane filters offer the highest level of assurance of chemical compatibility and filtration performance in aggressive chemicals, prolonged hot air service and other severe process conditions. Ultradyne ® filters’ PTFE membrane delivers superior flow rates and long service life.
Omnipore Membrane Filter, 10.0 um pore size, Hydrophilic PTFE membrane, 47 mm diameter. Expand. View Pricing. Page 1 of 47. or quartz air particulates.
Hydrophobic polytetrafluoroethylene (PTFE) membrane helps prevent pore blockage in vent applications, extending filter lifespan Liquid validation of B. diminuta retention helps provide reliable sterilizing performance in wet or dry conditions 100% forward flow integrity tested prior to release
Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high flow rates and throughput, low extractables and particle
Emflon® PFR Membrane Filter Cartridges offer high assurance and high integrity in their air and gas sterilizing services. Filters can be steamed and tested easily to maintain cleanliness and integrity standards. Keeping filters clean and up to date provides a long service life for the user. Using Pall PTFE membrane and hydrophobic technology, PFR filters remove contaminating bacteria and viruses.
The Pall Acro 50 is a disposable0.2 micron sterile vent filter and contains a Pall hydrophobic PTFE membrane, and is ideal for the sterile venting of small containers and as an in-line gas filter. The large effective filter area provides high flow rates, and filters can be autoclaved several times, ensuring low costs.
The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situ steaming conditions in either the forward or reverse direction.
The fittings are comprised of a PET insert with a fluorocarbon O-ring and a 45mm polypropylene sealing cap. Gas filters have 0.2 (u)m pore PTFE membranes. Stainless steel tubes are held in place by modified polyphenylene oxide thermoplastic nuts with integrated ferrules. The. Compare this item.
Sartofluor ® is the solution for all applications where sterile air is needed. A single-layer PTFE membrane construction ensures validated sterility, while providing maximum flow rate over a wide range of operating conditions. The optimal performance-to-cost ratio allows benefiting from the lowest cost-of-ownership for air/gas and aggressive
PTFE Pore Size (Removal Rating) 0.2 Quantity 3 pkg Unit of Measure PAC Min Order Qty 1 List Price $ 237.78 Add to Cart Add to Quote CAPSULE, AcroPak 300 0.2UM PTFE 100/PK Product ID 12085 Connections Stepped Hose Barb EFA (Effective Filtration Area) 280 cm² Media PTFE Pore Size (Removal Rating) 0.2 Quantity 100 pkg Unit of Measure PAC Min Order Qty
Flasks are made of lightweight clear PETG with molded-in graduations. High-density polyethylene closure uses a hydrophobic 0.2 µm PTFE membrane that allows sterile air exchange. Capacities range from 125 to 2000 mL . Individually packaged for easy storage and handling.
ptfe 0.2 um filter " within Products Sort by Relevance All Photos ( 1) Milli-DI® 0.2 μm Filter Adapter Match Criteria: Product Name, Keyword All Photos ( 2) BRAND® macro pipette controller membrane filters 3 μm (PP,PTFE) Match Criteria: Product Name, Keyword All Photos ( 2) Aervent®-50 Filter Unit 0.2 µm hydrophobic 1/4 in. HB/HB
