EZFlow® High Particulate Syringe Filters. membrane along with a glass fiber pre-filter. The filter membrane is available in PES or Hydrophilic PVDF materials, offered in 0.2µm or 0.45µm pore sizes. The filter membrane is reinforced with a polypropylene housing with a female Luer-Lok inlet and a male Luer Slip outlet.
(ideal for use with DMSO-containing solutions), or surfactant-free cellulose acetate membranes in either polypropylene or acrylic copolymer housings. The larger 50 mm diameter disc filter has a PTFE membrane and polypropylene housing with hose barb connectors. This product is ideal for filtering aggressive solvents or gases and applications
Product description Captiva Premium Syringe Filter, polypropylene housing, polytetrafluoroethylene (PTFE) membrane, 4 mm diameter, 0.2 um pore size, 100/pk. Captiva syringe filters offer the industryâs highest flow rates and loading capacities. Using Captiva syringe filters also significantly extends column lifetime.
Offers broad chemical compatibility with PTFE membrane and polypropylene housing; 100% integrity-tested to provide the high level of confidence you require “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications.
patented VersaCap® tech-nology, a Class VI PTFE Manifold and an Air Inlet Valve combined with a Foxx 25mm, 0.2μm PTFE Filter for safe vapor filtration. The Air Inlet Valve and PTFE Filter blocks out all harmful solvent vapors while also absorbing incoming contaminants from the incoming
Media: PES (hydrophilic), PTFE (Hydrophobic or Hydrophilic), PP (hydrophobic) Pore size or nominal rating: 0.2-0.45 um, 0.05-1.0 um, 0.20 um, 0.8-30 um, 0.45-1.0 um; Cannot be used for air filtration ; Typical Applications. Filter tissue culture media, fermentation broth, and ground water; Can be set in serial mode to maximize throughput volumes
First layer (GMF) acts as a prefilter to ensure longer membrane (0.2, 0.45, and 1.0 µm) life and higher filtration efficiency. Nylon membrane filter layer is inherently hydrophilic, has low extractables, is biosafe, and has excellent flow rates Polypropylene housing is thermally fused (no
Part Number: . Captiva Econofilter, polypropylene housing, polytetrafluoroethylene (PTFE) membrane, 13 mm diameter, 0.2 µm pore size, 1000/pk. Add to Favorites. + Create New list. Item successfully added to your list.
Captiva Premium Syringe Filter, polypropylene housing, polyethersulfone (PES) membrane, 15 mm diameter, 0.2 um pore size, LC/MS certified, 100/pk. Captiva syringe filters offer the industryâ s highest flow rates and loading capacities. Using Captiva syringe filters also significantly extends column lifetime.
(Use Sterile Filter and Membrane with Pore Size 0.2 • Pigment-free polypropylene housing ... 6875-1302 PTFE 0.2 1500
Part Number: 5190-5267. Captiva Econofilter, polypropylene housing, polytetrafluoroethylene (PTFE) membrane, 25 mm diameter, 0.2 µm pore size, 1000/pk. Add to Favorites. + Create New list. Item successfully added to your list.
mdi syringe filter type SYPL have a PES membrane filter in a polypropylene housing. The low protein binding PES membrane make these ideal for life science research applications, particularly where sample size is very small and recovery of a protein of interest is sought.
Aijiren Econofilters Syringe Filters. Ideal for busy, high-volume labs Captiva filtration products are available in a wide range of sizes, formats, and membranes to cover every matrix and sample. All Captiva syringe filters are shipped with an HPLC or LC/MS Certificate that guarantees low levels of observed extractables.
Acrodisc® Syringe Filters, 25 mm, Pall Laboratory. Filters Syringe Filters. These 25 mm syringe filters offer an available prefiltration layer and wide choice of filter media. Wide range of filter media available. Available in 0.2 µm for UHPLC applications. Available with pre-filter for difficult to filter samples.
Features and benefits: Pigment-free polypropylene (polycarbonate for Puradisc 30 and Aqua 30. Standard inlet and outlet luer connector. Tube-tip format (optional) for accurate dispensing into a micro-vial. Choice of membrane or glass microfiber filter media. Choice of filter sizes (4 mm, 13 mm or 30 mm) to minimize sample loss.
