polypropylene housing 0.22 um syringe filter Waters

This 33 mm syringe filter with a Hydrophilic Polyethersulfone membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.22 µm pore size used in preparation of aqueous solutions prior to chromatography or other instrument analyses.

The Whatman GD/X syringe filter is the ideal choice for the preparation of hard-to-filter samples. Constructed of a pigment-free polypropylene housing with a prefiltration stack of Whatman GMF 150 (graded density) and GF/F glass microfiber media, this filter eliminates sample contamination and allows you to filter even the most difficult samples with less hand pressure.

PTFE Syringe Filters, Pore 0.22-10 µm, D25 mm, Double Luer Lock, Nonsterile These syringe filters are particularly designed for laboratory single-use, and they are superior in .. $142.99

Polypropylene Syringe Filters, 0.22 um, 20mm, Threaded Double Luer Lock, ABS Housing, Nonsterile, 100 per pack, SPEC18197 Regular Price: $98.00 Price $83.30

PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes

syringe filters are for the preparation of hard-to-filter samples. The syringe filters have a pigment-free polypropylene housing to eliminate sample contamination and contain a pre-filtration stack of Whatman GMF 150 (graded density) and GF/F glass microfiber media, which allows users to filter even

Waters offers Pall Life Sciences laboratory filters for sample and solvent filtration, including: HPLC sample filters in syringe filter format. Solvent filters in membrane disc format. Solvent filtration apparatus. A wide selection of membrane types and pore sizes to deliver the right lab filter for any sample type, and a broad range of device

Polypropylene Syringe Filters, 0.22 um, 20mm, Threaded Double Luer Lock, ABS Housing, Nonsterile, 100 per pack, SPEC18197 Regular Price: $98.00 Price $83.30

This 33 mm syringe filter with a Hydrophilic Polyethersulfone membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.22 µm pore size used in preparation of aqueous solutions prior to chromatography or other instrument analyses.

Mar 24, 2021 · STERILE SYRINGE FILTERS - sterile syringe filters are made with PES membrane filters with polypropylene (PP) housing, using the most advanced methods and design features. The PES syringe filters with GF pre-filter has excellent dirt-holding capacity, which makes a syringe filter a much larger throughput for some “hard to filter” sample.

Waters offers scientists and lab managers AcrodiscGHP, 13mm 0.2um w/minispike, WAT097962. Minispike Syringe Filter. Hold-up Volume < 14 µL. Housing Material ...

Waters offers scientists and lab managers Acrodisc GHP, 25 mm 0.2 µm, WAT097964. Syringe Filter. Hold-up Volume < 100 µL. Housing Material. Polypropylene. Pore ...

Syringe Filters for use in Immunolabeling. Cellulose Acetate membrane with 4 mm diameter Poly-propylene housing with 7 mm 2 filter area. This 1 ml syringe filter is very useful in sterilization of micro/immunological reagents, enzymes, antibodies and immunolabeling. Non-sterile, bulk pack: 100/pkg, 400/case, autoclavable.

The syringe filter housings are polypropylene. PES – Low affinity for proteins and extractables with substantially faster flow rates than PVDF; suitable for pre-filtration and filtration of buffers and culture media. Catalog No. 50-189-7734. $79.26 / Case of 50. Qty Check Availability.

Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common