Laboratory filter membranes, also known as cut disc membranes, are used in conjunction with filter holders and other hardware in a variety of applications including prefiltration, solvent filtration, sample clarification, sterilizing filtration, air monitoring, particle collection and analysis, and other biological and environmental applications.
Polypropylene Microcentrifuge Tubes. Dynalon. Premium quality, 1.5 mL tubes Leak tested to 20,000 RCF Attached lid Uniform lid membrane thickness Frosted writing area Attached lids provide a tight leakproof seal, can be easily opened and allow trouble-free piercing. Tubes are leak tested to 20,000 RCF for 20 minutes at.
• Rigid Polypropylene Outer Cage Protects Filter • All Polypropylene One Piece Construction (except 0.2 micron (µm)) • Submicron Prefilter for Final Membrane Application • Asymmetric Polysulfone Media Used in 0.2 µm Grade • Fast Rinse-Up to 18 Megohm-cm Performance Specifications Filter Grades: 0.2, 0.25, 0.45, 0.8, 2, 3, 5, 10, 30
A factory-sealed bottle of 50 HPLC Certified Pall Acrodisc filters. Polypropylene housing. The connections are female Luer-Lok and male slip. Pall Syringe Filters. Note that the filters are dated June 2010.
filter, excellent and consistent recoveries were obtained through low to high levels for dimer and monomer. All of the other PVDF syringe filters gave very poor recoveries at low levels (0.1 and 0.2 mg/mL), especially for dimer. The results demonstrate that Captiva Premium PES filters can firmly support the analysis of low level protein samples
Inline filters from Siga Filtration Inline filters provide an easy installation solution with minimum pipe modifications. Siga Filtration can offer compact inline filters with a flow rate capability of 0.5 – 300 m3/h. Inline filters can be supplied with Polypropylene filter elements, stainless steel elements, or cleanable stainless steel baskets.
Disc Filtration Technology. Arkal Water Filtration Systems operate using a specially designed disc filtration technology. Thin, color-coded polypropylene discs are diagonally grooved on both sides to specific micron size. A series of these discs are then stacked and compressed on a specially designed spine.
Polypropylene Filter Housings . Length 419mm 813mm 228mm 381mm Surface Area 2.0ft2 4.4ft2 0.5ft2 1.0ft2 Max Flow 340 L/min 757 L/Min 94 L/Min 170 L/Min Suitable for any standard BFL-1 BFL-2 BFL-3 BFL-4 type housing Material PE-Polyester, PO-Polypropylene, NMO-Monof ilament Nylon Micron Rating 5,10,25,35,50,75,100,200,250,300,400,500,600,800
New in the box Whatman microplate devices unifilter. 96 wells plates. 0.45 um hydrophilic PVDF filter, glass filled polypropylene, 2 ml, total, long drip, cat no 7700-7206, total 25 plates per box. Lot airoffctopfrontmed
Filter Media PTFE, Nylon, PVDF, Polypropylene Housing Polypropylene Pore Size 0.2 and 0.45 µm Effective Filtration Area 25 mm : 2.8 cm 2 Sample Volume 25 mm: <100 mL Typical Hold-Up Volume 25 mm : <100 µL Maximum Operating Temperature 55 ºC Ordering Information Part Number Description Pkg 4114 ValuPrep 25 PTFE 0.45 µm 1000/pk
The Membrane and Process Development Product line at Sterlitech includes a wide range of commercially available polymeric flat sheet membranes, as well as ceramic membranes, bench-scale cross/tangential flow test cells, and filtration equipment. Sterlitech also offers Custom Designed Skid Mount Membrane Filtration Systems.
Life Sciences Support. +1-888-426-7255. Industrial Support. +1-610-646-6981. Ask a question. Emflon® PFR membrane in Novasip™ capsule, 0.2 µm sterilizing grade, 1700 cm² EFA, 1-1½ in. sanitary flange fittings, 13 mm sanitary flange vent and drain connections with no valve.
Emflon II membrane filters have a removal rating of 0.2 μm in liquid service and less than 0.02 μm particulate for air/gas applications. Connects easily to hoses of various sizes in-line or as a final filter. Light weight (< 27 grams) prevents crimping of tubing. Stable with gamma irradiation. 3 Part numbers available
Jan 01, 2021 · A global leader in high-tech filtration, separation, and purification, serving the needs of customers across the broad spectrum of life sciences and industry.
Emflon II membrane filters have a removal rating of 0.2 μm in liquid service and less than 0.02 μm particulate for air/gas applications. Connects easily to hoses of various sizes in-line or as a final filter. Light weight (< 27 grams) prevents crimping of tubing. Stable with gamma irradiation. Excellent for disposable systems. Eliminates
