Filter grades 0.2, 0.25, 0.45, 0.8, 2, 3, 5, 10, 30, 50, 100 µm Recommended change-out differential pressure1 2.4 bard (35 psid) Maximum forward differential pressure 4.8 bard (70 psid) @ 20 C (68 F) 2.8 bard (40 psid) @ 65 C (150 F) Food and water contact use
Pall 4423 Acrodisc Syringe Filter with PTFE Membrane, 13 mm Diameter, 0.2 um Pore Size, Nonsterile (Pack of 3) 854.35 Whatman 6700-3602 Polycap TF 36 PTFE Membrane Capsule Filter with SB Inlet and Outlet, 60 psi Maximum Pressure, 0.2 Micron 116.74
Pall Acrodisc Syringe Filters, 25mm, Pall Life Sciences Ptfe Membrane is a reliable and dependable addition to the Pall Filters family of products. Combining top-notch and uncompromising quality with an affordable price, the Pall Acrodisc Syringe Filters, 25mm, Pall Life Sciences Ptfe Membrane 4219/ 28143-924 can fulfill your laboratory needs while still offering a great value for the money.
Large Flow 0.2 Micron PTFE Air Filter Cartridge 20 inch AB2PFR7PVH4, US $ 27 - 33 / Piece, Advertising Company, Farms, Online support, None.Source from Hangzhou
0,005 - 2,0 µm only depending on sealing compounds up to 100 bar, depen-ding on filter element 1 - 14 1 000 mm (standard) Pore sizes Temperature resistance Pressure resistance pH-range Length Material Technical Data Table of filter geometries
This item: Pall 4251 Acro 50 Vent Devices with PTFE Membrane, 50 cm, 0.2 µm Pore Size, Hose Barb, Pack of 18 $376.45 ($20.91/Item) Usually ships within 6 to 10 days.
0.2 F Both ends flat/one end sealed B NBR 004 0.45 No. Length H Inner O-ring/flat V Fluorine rubber 008 0.8 5 5” J 222 stainless steel liner/flat F Wrapped fluorine rubber 010 1.0 1 10” K 222 stainless steel liner/fin 030 3.0 2 20” M 222/flat 050 5.0 3 30” P
2.5inch And 5inch Capsule PP Pleated Capsule Filter Element for Lab Use PP - K72 Series PPK72 Series provides a relatively low cost and absolutely safe alternative to membrane capsule filters. Typical application wildly include pre-filtration and clarification of
Poly-Fine II Series Filter Cartridges. Proprietary filter media produced by Pall for highly consistent performance. High contaminant-holding capacity. Wide chemical compatibility. Rigid polypropylene outer cage protects filter. All polypropylene one piece construction (except 0.2 micron)
Alibaba.com offers 1,571 pall 0.2 micron vent filter products. A wide variety of pall 0.2 micron vent filter options are available to you,TianShan Model K68-A Capsule Filter Low Hold-up Volume 1 Micron Capsule Filter These capsules are self contained, ready to use
Acrodisc® Syringe Filter with PTFE Membrane - 0.2 µm, 25mm (1000/pkg) “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications.
The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situ steaming conditions in either the forward or reverse direction.
Hydrophobic PTFE Membrane Filters / Type 11807. The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. Added to Shopping Cart.
These filters incorporate a double-layer (0.2 μm) of inherently hydrophobic, Pall-manufactured polytetrafluoroethylene (PTFE) membrane. The polypropylene hardware is specially formulated with protective anti-oxidants and the filter's support and drainage layers are made of
Emflon® PFR Membrane Filter Cartridges offer high assurance and high integrity in their air and gas sterilizing services. Filters can be steamed and tested easily to maintain cleanliness and integrity standards. Keeping filters clean and up to date provides a long service life for the user. Using Pall PTFE membrane and hydrophobic technology
