Sep 28, 2021 · Millipore Express ® SHF Cartridge Filter 10 in. 0.2 µm Code 7 Silicone. Product Information. Device Configuration. Cartridge. Maximum Inlet Pressure, bar (psi) Forward - 7 bar (100 psi) @ 25 °C; 1.7 bar (25 psi) @ 80 °C; 0.35 bar (5 psi) @ 135 °C; Reverse - 2.07 bar (30 psi) @ 25 °C; 0.07 bar (1 psi) @ 135 °C. Cartridge Code.
Reduced Surface Area and Lower Costs. Millipore Express ® SHF filters feature faster flow rates, allowing you to process equivalent volumes with reduced filtration area. This high-flux benefit has been shown to deliver greater than 50% savings in filtration costs.
0.2 µm. Inlet Connection. Sanitary Flange. Outlet Connection. Sanitary Flange. Bubble Point at 23 °C. ≥ mbar (16 psig) nitrogen with 70/30 % IPA/water. Gravimetric Extractables. The extractables level was equal to or less than 15 mg after 24 hours in a 70/30% IPA/water mixture at controlled room temperature.
Clarigard® Cartridge Filter. Compare. Product No. Description. Pricing. D00272T01. pore size 0.2 μm, cartridge nominal length 20 in. (50 cm), Code 7 (2-226; O-rings w/locking-tabs)
Whatman® ReZist® syringe filter 50 mm, pore size 0.2 μm, PTFE membrane, sterile, pkg of 10 ea; Synonyms: Z698822; find -WHA10463607 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
Millipore ptfe 0.22 micron filter for sale-Voa Vial Supplier Millipore® Filter Membrane Discs 0.65 micron. Type DVPP, 47mm Diameter General Description An opened N.O.S. pack of approximately 45 filters. Each inner plastic case contains between 20-25 of the original 25 discs so the total count has been rounded down to 40 total. Send Inquiry
Millipore ptfe 0.2 micron filter for wholesales . Certified analytical testing vials and hplc autosampler vials
Nov 22, 2021 · wheel filter PTFE 0.2 micron filter Millipore-Analytical Nov 16, 2021 · Merck Millex™-FG Syringe Filter Unit, Hydrophobic PTFE, 0.2 μm Features a hydrophobic Fluoropore™ (PTFE) m date: 2021-11-22
Pack of ~80 Millipore 0.5 um hydrophobic PTFE 13 mm (1/2 inch) filter They have a pore size of 0.45 microns and are hydrophobic due to a PTFE (Teflon) component. Make Supersized Seem Small. 60 mL/min x cm².
Durapore® Cartridge Filter 10 in. 0.22 µm Code 7 | CVGL71TP3This product was manufactured with a Durapore ® membrane which meets the criteria for a HOME Products
Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm - Sigma-AldrichMillex-FG, 0.20 µm, hydrophobic PTFE, 25 mm A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic
0.2 μm pore size 80 % porosity shipped in ambient Description General description Filter Code: JGWP Filter Type: Screen filter Our Fluoropore® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications.
Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm. Background Information. Millex® syringe filter units with hydrophobic Fluoropore™ or Millipore Express® PLUS PES membrane are ideal for in-line sterilization of gases and venting sterile containers, and filters with Fluoropore™ membrane can also be used for sterilizing or clarifying organic solutions. There are also specialized filter units to protect hemodialysis transducers from blood and moisture.
0.2 μm pore size 80 % porosity shipped in ambient Description General description Filter Code: JGWP Filter Type: Screen filter Our Fluoropore® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications.
Millipore 0.2 um ptfe filter distributor MF-Millipore™ Membrane Filter, 0.45 µm pore size | HAWP04700 MF-Millipore Membrane Filter, 0.45 µm pore size 47 mm diameter, mixed cellulose esters (MCE) membrane, hydrophilic, white, 100 discs - Find MSDS or SDS, a COA, data sheets and more information.
