Acro® 50 Vent Filters Product image is a representative example for illustration purposes; actual image may vary Pall Acro 50 disposable filters are 0.2 micron
Acro® 50 Vent Filters Product image is a representative example for illustration purposes; actual image may vary Pall Acro 50 disposable filters are 0.2 micron
Cytiva's Whatman PTFE Membranes are strong hydrophobic membrane filters that can resist corrosive and aggressive media used in gas sterilization.
Buy Microporous Membrane Filter PTFE Diameter 47mm 50mm 60mm Hydrophilic PTFE Micro Filter Membranes Pore Size 0.2um 0.45um 50/PK at Aliexpress for US
Hydrophobic membrane. Can withstand aggressive solvents, liquids, and gases that damage other membranes. Eg: filtration of HPLC solvents. Material.
The lower surface tension of the membrane, the greater the contact angle and the easier it is to repel liquid droplets. For example, a 0.2 micron hydrophobic
Omnipore™ PTFE. Hydrophilic. JVWP. 0.1. 0.1. 0.4. 342.3. NA. JGWP. 0.2 Applications. Filter Code1. Color. Pore Size. (µm). Bubble Point2.
The membrane of the hydrophobic PTFE syringe filter is chemically resistant to almost all solvents. They can be used together with corrosive media such as
Filter Material Specs · PTFE membranes are inherently hydrophobic; they are ideal for the filtration of nonpolar liquids and gases. · Very resistant to solvents
PTFE membrane filter has excellent chemical stability, resistance to organic solvents and strong acids, corrosion resistance; high-temperature resistance, and
They are supplied in two pore sizes, 0.2 and 0.45 µm, and in four diameters 4, 13, 25 and 50 mm. vol. They are supplied in sterile and non-sterile versions.
Oct 8, 2019 Pre-conditioning of the PTFE membrane filters could potentially reduce ... filtration of the prepared samples through a microporous (<0.2 μm ...
SERENE Hydrophobic PTFE Sterilizing Grade 0.2um filter cartridges are highly retentive hydrophobic membrane designed for critical liquid and gas sterilization.
Durable, efficient, and broadly compatible, these pure, hydrophilic PTFE membranes are ideal for use with HPLC seperations, aqueous/organic solvents,
screen, sieve or microporous filters, membranes retain particles or PTFE with solvents ... 0.2 µm. A typical serial stack incorporating Prefilters,.
0.2-µm membrane filters and the effects on UHPLC three commonly used solvents (water, acetonitrile, ... PVDF, and PTFE membranes all retained more.
