Description Syringe Filters, 0.2 um Hydrophobic PTFE, 50 mm, Sterile; 10/Pk Key Features Non-pigmented acrylic or polypropylene (PP) housings feature integral filter sealing to avoid the risk of contamination from pigments and adhesives
Description Syringe Filters, 0.2 um Hydrophobic PTFE, 50 mm, Sterile; 10/Pk Key Features Non-pigmented acrylic or polypropylene (PP) housings feature integral filter sealing to avoid the risk of contamination from pigments and adhesives
Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.
Acrodisc® Syringe Filters with PTFE Membrane - 0.2 µm, 13mm, male slip luer outlet (100/pkg 300/cs) Product ID 4423 Unit of Measure 1/CV Min Order Qty 1 Pore Size 0.2 µm µm nominal Diameter (Metric) 13 mm Effective Filtration Area (Metric) 1 cm² Filter Media Hydrophobic PTFE membrane on a polypropylene support Hold-Up Volume <30 µL Housing Material
These Corning® syringe filters have polypropylene copolymer housings, hose barb inlets and hose barb outlets. PTFE membranes provide the best chemical resistance These naturally hydrophobic membranes can be used for venting applications or filtering gases 100% integrity tested, sterile and nonpyrogenic and noncytotoxic Manufactured in accordance with ISO 9001 standards
Use Thermo Scientific™ Choice™ PTFE Hydrophobic Syringe Filters for filtration of aggressive organic, highly basic or hot solutions and as transducer protectors. They can filter aqueous solutions after pre-wetting with an alcohol. These syringe filters provide cleaner sample extracts by removing interfering materials and fine particles down to the rated pore size.
Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version S is a non-sterile bulk pack. Units can be sterilized by autoclaving or EO.
Pall 13 mm Acrodisc syringe filters are available with a standard male slip luer outlet or Pall’s proprietary minispike outlet. The minispike allows for easy handling with a HPLC vial, and offers a reduced hold-up volume, ensuring maximum filtrate recovery. Typical hold-up volumes: 13 mm, male slip luer outlet: < 30 μm. 13 mm, minispike
Minisart® SRP4 Syringe Filter 17844----------Q, 0.2 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17844 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet.
Titan3 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 30 mm, with Pre-Filter, 100 Pk. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Titan3 PTFE (Hydrophobic) Syringe Filter 0.45 µm, 4 mm, 100 Pk.
We offer a wide selection of syringe filters for every lab: Premium Syringe Filter, PTFE, 0.2µm, 15 mm, 100 pc/PAK ... 30 MM TEFLON Target syringe filter, 1.0 UM ...
Catalog number: 199-2020. Thermo Scientific™ Nalgene™ syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications. Whether your research necessitates prefiltration, sample
4mm Syringe Filter Ca 0.2um 100 / Pk National Scientific Related Products: Syringe Filter 0.2 Compare this item Fluid Transfer Set, BBraun FT2000S, 35IN Length with 0.2um Supor Filter, Vented McKesson Medical-Surgical Compare this item Filter membrane Nylon 47mm 0.20um 100/pk Aijiren Technologies
Millex-AA Syringe Filter Unit, 0.80 µm, mixed cellulose esters, 25 mm Match Criteria: Product Name All Photos ( 1) Millex-FA Syringe Filter Unit, 1.0 µm, hydrophobic PTFE, 50 mm, HB-HB Match Criteria: Product Name All Photos ( 1) Medical Millex-GV Syringe Filter Unit, 0.22 µm, PVDF, 33 mm, gamma sterilized Match Criteria: Product Name
Catalog number: F2513-4. Related applications: Chromatography. Technical Support Customer Service. Adding a syringe filtration step prior to injection not only helps to ensure more consistent and reliable results; it also helps protect delicate instruments and prolongs column life. Available in sizes and membrane types to meet any application need, Thermo Scientific™ Target2™ Syringe Filters provide cleaner sample extracts by removing interfering materials and fine particles.
ptfe 0.2 um filter " within Products Sort by Relevance All Photos ( 1) Milli-DI® 0.2 μm Filter Adapter Match Criteria: Product Name, Keyword All Photos ( 2) BRAND® macro pipette controller membrane filters 3 μm (PP,PTFE) Match Criteria: Product Name, Keyword All Photos ( 2) Aervent®-50 Filter Unit 0.2 µm hydrophobic 1/4 in. HB/HB
