PTFE Membrane, WTP Range, 0.2 µm pore size, 47 mm circle (100 pcs) 28420777. PTFE Membrane, WTP Range, 0.5 µm pore size, 47 mm circle (100 pcs) 28420778. PTFE Membrane, WTP Range, 1 µm pore size, 25 mm circle (100 pcs) 28420780. PTFE Membrane, WTP Range, 1 µm pore size, 47 mm circle (100 pcs) Overview. Overview.
0.2 µm, AcroPak 300 Vent Filter Capsule with PTFE Membrane Offers broad chemical compatibility with PTFE membrane and polypropylene housing; 100% integrity-tested to provide the high level of confidence you require “Pall Laboratory products are designed for laboratory applications only.
Hydrophobic PTFE Membrane Filter Pore: 0.22 um diameter 47mm, isi 200pcs/pk. Cocok untuk menyaring fase gerak / mobile phase HPLC Acetonitrile (ACN), Methanol (MeOH), Aseton, heksane, propanol, butanol, dll merk membrane solution, bukan pall
PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes
ePTFE liquid filtration membrane. ePTFE liquid filtration membrane is made of PTFE resin as a raw material, and is made into a polytetrafluoroethylene hydrophobic film by a special process and biaxial stretching, and then the original hydrophobic angle is changed to 34 ° C by special chemical and physical modification, thereby the membrane has
"/>
mdi AseptiSure TH PTFE cartridge filters are specially designed high temperature resistant PTFE filters which are steam sterilizable at upto 135°C. These filters are validated with liquid microbial challenge test as per ASTM F 838-05 to offer absolute retention even under high moisture conditions. These are also validated for other key performance
"/>
Foxx Life Sciences 365-2212-OEM EZFlow Membrane Disc Filter, Hydrophobic PTFE, 25 mm Diameter.2 µm Pore Size (Pack of 50) $28.37 $ 28. 37 Foxx Life Sciences 364-2612-OEM EZFlow Membrane Disc Filter, Nylon, 47 mm Diameter.2 µm Pore Size $28
In order to prevent pore blockage, an extremely hydrophobic PTFE membrane is used which prevents wetting with water or moisture. This Inherently Hydrophobic cartridge with an absolute removal rating of 0.2 μm in liquids and 0.003 μm in gases are highly recommended for sterile filtration of gas,air in pharmaceutical, biological liquids and fermentation industries.
China 0.2 Um Hydrophobic Filter Element PTFE Membrane for Sterile Filtration of Gases, Find details about China 0.2 Um Hydrophobic Filter Element, PTFE Membrane from 0.2 Um Hydrophobic Filter Element PTFE Membrane for Sterile Filtration of Gases
Hydrophilic PTFE Filter Cartridge. This filter is characterized by hydrophilic PTFE membrane to meet critical filtration requirement in extremely aggressive environment. This filter is designed for filtration of aggressive acids, bases & organic compound. It also does not require pre-wetting.
9/7/2019 · Hydrophobic PTFE membrane filter is mainly used in:1. air monitoring and gas filtration. 2. with strong chemical compatibility. Main Applications Of Hydrophobic And Hydrophilic PTFE Membrane Filter Hawach is a professional technology membrane manufacturer integrating analytical chemical product development, manufacturing, sales, and service.
0.2 1 5 10 25 80 Um PE Sintered UHMWPE Filter Fritted Hydrophobic Porous Plastic Polyethylene HDPE Medicine Air Filter Tube Disk US $0.01-2 / Piece Milli-Pore Pleated Membrane 0.2 Um Filter Cartridge for Depth Filtration
Hydrophilic PTFE 0.22/0.45 um IC Syringe Filters. Hawach hydrophilic PTFE syringe filters stand up to the most aggressive solvent, acid, and base samples. Female Luer lock inlet, male slip outlet (50mm is hose barb). PTFE syringe filter product numbers ending with "B" are hydrophobic; all other. PTFE syringe filters are hydrophilic.
The membrane is peripherally bonded to an annular polypropylene ring (except the 13 mm diameter disc) for ease of handling and is suitable for both vacuum and pressure filtration Anopore is available in 3 nominal pore sizes: 0.02 µm, 0.1 µm, and 0.2 µm, and in
Category: Membrane Solution Tags: 0.22um, 200/pk, 25mm, Hydrophobic PTFE Membrane Filter Related Products Pipette Micro Tips, 0.1~10ul, Natural Color, non-sterile
