Millex filter units with hydrophobic Fluoropore membrane are ideal for sterilizing gases, venting sterile containers, and sterilizing or clarifying organic solutions. Specialized filter units protect hemodialysis transducers from blood and moisture. 50 mm Millex filter units are also used for vacuum line protection. All units are bi-directional.
Hydrophobic filters will not wet in water but will wet in low surface tension liquids, for example, organic solvents such as alcohols. Once a hydrophobic filter has been wetted, aqueous solutions also will pass through. Hydrophobic filters are best suited for gas
Minisart® SRP15 Syringe Filter 17558----------K, 0.2 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17558 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration and has a male spike outlet.
Filter Diameter/Dimension Effective Filter Expected and Description Area (cm2) Throughput (mL)* 4 mm syringe/disc 0.07 0.05-3 15 mm syringe/disc 1.7 3-15 25 mm syringe/disc 4.8 10-50 26 mm syringe/disc 5.3 10-50 28 mm syringe/disc 6.2
PTFE Syringe Filters, 0.45 µm (250/pkg 750/cs)PTFE Syringe FiltersNon-Sterile Syringe Filters Pall Corporation is a filtration, separation and purification leader providing solutions to meet the critical fluid management needs of customers across the broad spectrum
Simsii Syringe Filter, Hydrophobic PTFE Membrane Disc, Diameter 25 mm, Micron Pore Size 0.22 um, Pack of 100 5.0 out of 5 stars 1 $69.99 $ 69 . 99 ($7.00/10 Items)
Item Syringe Filter Membrane Dia. 13 mm Pore Size 0.22 um Capacity 10mL Filter Material Hydrophobic PTFE Housing Material Polypropylene Inlet Connection Luer-lok(TM) Outlet Connection Luer-slip (no- barb) Max. Pressure 90 bar For Use With Liquids
Pore Size: 0.45um Diameter:25mm PES Syringe Filter Polypropylene Housing 4.CA Syringe Filter Part No. FC1322 FC1345 FC2522 FC2545 Description Pore Size: 0.22um Diameter:13mm CA Syringe Filter Polypropylene Housing Pore Size: 0.45um
This filter product complies with the title 21 of the Code of Federal Regulations (CFR) , section 210.3(b) (6) and 211.72. Housing material Acrylic-based multipolymer compound (MBS) Device type Syringe Filters Sample Type Air/Gas pH Range 3.0 – 12.0 4.5 bar
Millex-GP Syringe Filter Unit, 0.22 µm, polyethersulfone, 33 mm, gamma sterilized A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 50. - Find MSDS or SDS, a COA, data sheets
FAQs - FILTRATION What membrane filter pore size should I use for sterilization? Regardless of the membrane filter material, always use a 0.2 µm pore size membrane filter as the final filter for any sterilizing filtration. The 0.2 µm membranes used in Thermo
100 pack of Cole-Parmer 13 mm, 0.22 um Hydrophobic PTFE Syringe Filters,"Great Product Gamma stable. Great product and price. I would recommend and
Sterile Hydrophobic PTFE Syringe Filter, 0.22um, 25mm, 100/pk Sterile Hydrophobic PTFE Syringe Filter, 0.22um, 25mm, 100/pk Free! Part Number : SFPTFE025022SB Add to cart Category: Membrane Solution Tags: 0.22um, 100/pk, 25mm, Related Products
Product Description. SDS. SAMP2GPNB. This 33 mm syringe filter with a Hydrophilic Polyethersulfone membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.22 µm pore size used in preparation of aqueous solutions prior to chromatography or other instrument analyses.
The membrane with 0.2µm is the filter of choice for sterile filtration of aqueous solutions, such as nutrient media, buffers and sera. The results of publications on adsorption are difficult to correlate, as mostly different test substances, conditions and detection methods were used, and the membranes were tested without previously being sterilized.
