SLFGL25BS. Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm, A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, with Luer outlet, ethylene oxide sterilized. Comes in a pack of 50.
SLFGL25BS. Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm, A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, with Luer outlet, ethylene oxide sterilized. Comes in a pack of 50.
Sartofluor® Capsule. Sartofluor ® is the solution for all applications where sterile air is needed. A single-layer PTFE membrane construction ensures validated sterility, while providing maximum flow rate over a wide range of operating conditions. The optimal performance-to-cost ratio allows benefiting from the lowest cost-of-ownership for
Purchase online - hydrophobic PTFE 25 mm Acrodisc® syringe filters, ideal for the filtration of gas and organic solvents. These syringe filters offer excellent chemical compatibility. Acrodisc® 25 mm Syringe Filter, 0.2 µm PTFE Membrane, 200/cs | Pall Shop
Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications.
supplied with single vial compressor, PTFE membrane, pore size 0.2 μm, amber vial color, pack of 100. Expand. Hide. WHAGN203NPEORGSP. supplied with single vial compressor, PTFE membrane, pore size 0.2 μm, clear vial color, pack of 100. Expand.
Ultradyne ® filters’ PTFE membrane delivers superior flow rates and long service life. The highly porous membrane is inherently hydrophobic and offers maximum chemical compatibility with minimal extractables in a wide range of fluids and applications. Support components are all-polypropylene.
Our LifeASSURE™ PFS series PTFE Filter Cartridges use a hydrophobic polytetrafluoroethylene (PTFE) membrane, which helps minimize pore blockage from moisture in vent applications. Our filters are validated by a liquid bacterial challenge for complete retention based on the ASTM standard, which provides a high level of reliable sterilizing
Target2 PTFE Syringe Filters are used for general biological filtration. They are especially well-suited for applications where high protein recovery is desired. Product Overview Recommendations Documents Showing 7 of 7 Add to cart Target2 Syringe Filters are an ideal choice for general purpose laboratory use.
PTFE is a hydrophobic membrane, so it will repel water and is not suitable for the filtration of aqueous solutions. As well as being suitable for the filtration of organic solvents in applications such as HPLC and UHPLC sample preparation, the hydrophobic nature of the PTFE membrane makes these syringe filters ideal to use in gas filtration or
SLFG05010. Millipore. Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm. A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10. Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
Sartofluor®. Sartofluor ® is the solution for all applications where sterile air is needed. A single-layer PTFE membrane construction ensures validated sterility, while providing maximum flow rate over a wide range of operating conditions. The optimal performance-to-cost ratio allows benefiting from the lowest cost-of-ownership for air/gas
Adding a syringe filtration step prior to injection not only helps to ensure more consistent and reliable results; it also helps protect delicate instruments and prolongs column life.Available in sizes and membrane types to meet any application need, Thermo Scientific™ Titan3™ PTFE Hydrophobic Syringe Filters provide cleaner sample extracts by
Corning® Hydrophobic PTFE filter 0.2 µm, 5 Pieces Product Number 4991 E-mail Print Quality Certificate These filters are use in the Corning® Stripettor™ Ultra Pipet Controller. $50.92 per case Add to cart Out of Stock Check Availability Product Information Resources Review (s) Details
Description. Pricing. D00272T01. pore size 0.2 μm, cartridge nominal length 20 in. (50 cm), Code 7 (2-226; O-rings w/locking-tabs) Expand. Hide. D00273S01. pore size 0.2 μm, cartridge nominal length 30 in. (75 cm), Code 7 (2-226; O-rings w/locking-tabs) Expand.
Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17844 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version Q is a non-sterile bulk pack. Units can be sterilized by autoclaving or EO.
