Teflex PTFE Microporous Filter Membranes Are Produced by Multi-directional Stretching Process and Include ePTFE Membrane and ePTFE Tubes. ePTFE Membrane is Used for Gas and Liquid Filtration and is Divided into Hydrophilic and Hydrophobic PTFE Membranes according to Different Industry Applications.
Omnipore Membrane, PTFE, hydrophilic, 0.2 µm, 25 mm, white, plain: 背景信息: Our Fluoropore™ membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications.
Phenomenex 9 All-Glass Vacuum Mobile Filter Membranes Phenex ... AF0-0511 0.2 25 PTFE 100/pk AF0-0512 0.45 25 PTFE 100/pk
biological fluids and gases is usually done with 0.2 or 0.22 µm pore filter membranes. Clarification and prefiltration of solutions and solvents is best accomplished with 0.45 µm or larger filter membranes. Prefiltration to improve filter performance can also be accomplished by the use of glass fiber prefilters that can be purchased separately.
The naturally hydrophilic Nylon 6,6 membrane provides low extractable, long filter life and enhanced contaminant reduction. LifeASSURE™ IMC filter cartridges are ideally suited for DI water, critical parts cleaning, and other chemical applications where high efficiency contaminant reductions at 0.1, 0.2, 0.45, 0.65, and 0.80 µm is required.
Phenomenex developed Verex Filter Vials with diverse color-coded caps for easy identification of the correct membrane and pore size for the various samples that undergo filtration. Five different membrane types (regenerated cellulose, polytetrafluoroethylene, nylon, polyethersulfone, and polyvinylidene fluoride) and two pore sizes (0.2 μm and
A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50 Compare this item
What membrane filter pore size should I use for sterilization? Regardless of the membrane filter material, always use a 0.2 µm pore size membrane filter as the final filter for any sterilizing filtration. The 0.2 µm membranes used in Thermo Scientific™ Nalgene™ filters have been tested and shown to retain 100% of a challenge of 1 X 107
0.2 µm, AcroPak™ 300 Vent Filter Capsule with PTFE Membrane Offers broad chemical compatibility with PTFE membrane and polypropylene housing; 100% integrity-tested to provide the high level of confidence you require “Pall Laboratory products are designed for laboratory applications only.
Jan 04, 2021 · Disposable filter units (250 mL, 0.2 µm Polyethersulfone membrane) used for filtering dissolved starting extract and disposable syringe filters (25 mm, 0.2 µm PTFE membrane) used for filtering dissolved intermediate from the first chromatography step were purchased from Corning Inc. (Corning, NJ, USA).
BRAND® accu-jet® pro pipette controller membrane filters spare membrane filter 0.2 μm, non-sterile; find -Z333913 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
A versatile PVDF membrane filter designed for critical filtration of aqueous and organic solvent-based solutions. The hydrophilic SteriLUX ® polyvinylidene fluoride (PVDF) membrane filter is available in discs, capsules, high capacity UltraCap ® and UltraCap ® H.D. capsules, and cartridges with 0.1 µm, 0.2 µm, 0.4 µm and 0.6 µm absolute ratings.
Nylon has inherent hydrophilic characteristics and works well for filtration of many aqueous and mixed-organic samples. For applications that require low protein or non-specific binding characteristics, Phenomenex recommends Phenex-RC (Regenerated Cellulose) filters.
Mar 23, 2007 · The mixture was filtered using a PTFE membrane filter (1.0 um pore size) and the acetone was evaporated using a solvent evaporator to obtain a white solid. The solid was dissolved in 200 ml of anhydrous acetone and the solution was filtered to remove the insoluble portion using the PTFE membrane filter.
