Minisart ®SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17558 with a pore size of.
Minisart ®SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17558 with a pore size of.
PTFE Vent Filter, Sterile, 0.2 Micron, 50mm, 6 to 12mm hose BARB, 10/Pk. Easy-to-use, sterile ,and disposable, these In-Line Filters contain a hydrophobic PTFE
The PerkinElmer Red PTFE (Hydrophilic) Syringe Filters, 0.22 µm, 25 mm (100/pack) have broad chemical compatibility and high pH resistance and are optically
Strict quality control: Syringe filters are integrity tested to ensure a proper filter Nitrocellulose, Nylon, PE, PES, PTFE, PVDF, Regenerated Cellulose.
Feb 17, 2020 When using air-vents, these syringe filters are capable of stopping moisture from passing ... PTFE Hydrophilic Syringe Filters 0.2 or 0.45um.
Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a
Product Number. Media. Pore Size. (μm). Qty./Pkg. 9911-2504. PTFE. 0.45. 500. 9920-2502. H-PTFE. 0.2.
Non-sterile syringe filters are used across a range of filtration and sample preparation applications. They are widely used in analytical chemistry for sample
Note: Syringe filters are for laboratory use only. 23974, Purple, 4 mm, PTFE (polytetrafluoroethylene), 0.22 µm, 100-pk. Syringe Filter, Select Deselect ...
The filters are produced in clean room and 100% integrity tested and flushed with ultrapure water. Hydrophobic PTFE series pleated filter cartridge is
Outlet, -, 1/8" NPT, Stepped Hose Barb, Stepped Hose Barb. Membrane, 50mm Hydrophobic PTFE. Filtration Area, 19.6cm². Air Flow Rate, 18-20 LMP @ 1kg/cm².
Typical Performance Characteristics (*0.2μm). Filtration Efficiency ≥99.99999% Brevundimonas diminuta. Thickness 280-440μm (Supported). Typical Applications.
Buy Advantec 25HP020AN Syringe Filters, 0.2 um Hydrophilic PTFE, 25 mm; 100/Pk and more from our comprehensive selection of Advantec Disposable Sterile
For aqueous samples, it is preferable to use a hydrophilic membrane (wwPTFE, PVDF, or Nylon) versus a hydrophobic membrane (PTFE). With proteinaceous samples, a
