This is sometimes done, for example, with PTFE and PVDF materials. 0.2 microns in diameter, then choose a syringe filter with a 0.20 µm pore size.
This is sometimes done, for example, with PTFE and PVDF materials. 0.2 microns in diameter, then choose a syringe filter with a 0.20 µm pore size.
Hydrophilic-PTFE-Membrane.jpg Typical Performance Characteristics (*0.2μm). Filtration Efficiency ... Solvents/Acids/Aggressive Chemicals Filtration ...
We offer a range of high purity gas and liquid filtration (99.9% efficiency) ... 0.2µm. 0.45µm. 1µm. 3µm. 10µm. 30µm. Flow / Pressure Drop.
PTFE Membrane Type; Hydrophilic PTFE Membrane Type; Hi Performance PTFE filter made of PTFE and polypropylene with broad chemical compatibility, ...
These Corning® syringe filters have polypropylene copolymer housings, hose barb inlets and hose barb outlets. PTFE membranes provide the best chemical
broad chemical compatibility. Apply to high-through, high efficiency filtration PTFE syringe filters. 13mm Syringe Filters. 0.2µm. 100. AS041320. 0.45µm.
PTFE Cartridges are well-suited for critical applications where superior flow and particle removal efficiency at 0.1 and 0.2 micron is required.
The extreme chemical resistance of. PTFE membranes makes them very useful for filtering solvents or other aggressive chemi- cals for which other membranes are
Isopore Membrane Filter, 0.2 µm pore size, hydrophilic polycarbonate membrane, While PTFE is known for its high strength, the addition of a high-density ...
0.2 micron pleated Ptfe PP cartridge filter for filter Housing with 226/222 Excellent performance of high temperature resistance,repeat steam ability in ...
Fluoroflow® Filter Cartridge. Performance Attributes. Water flow rates, Typical*. Micron gpm/psid lpm/100mbar. 0.05. 0.9. 4.9. 0.1. 2.3. 13. 0.2.
The PerkinElmer Clear PTFE (Hydrophobic) Syringe Filters, 0.22 μm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance.
In one report published in 1993, 0.4-µm pore diameter PTFE filters were used to which are true high performance stationary phases for biochromatography.
A porous form of PTFE (polytetrafluoroethylene), Zitex G exhibits the same chemical inertness, thermal stability and non-wetting characteristics of this
Results 1 - 10 of 38 10463500, Puradisc 30 mm Polytetrafluoroethylene Syringe Filter, 0.2 µm, sterile (50 pcs), (formally known as ReZist), 30 mm ; 10463503 ...
