MF-Millipore Membrane Filter, 0.22 µm pore size, 47 mm diameter, Flow Rate: Defined as the time required for the flow stream to pass through the filter, ...
MF-Millipore Membrane Filter, 0.22 µm pore size, 47 mm diameter, Flow Rate: Defined as the time required for the flow stream to pass through the filter, ...
The polyethersulfone membrane offers high flow rates. 13 mm, 0.20 µm, PTFE, PP, Non-sterile, 28145-491, Case of 100. Retrieving.
The PerkinElmer Clear PTFE (Hydrophobic) Syringe Filters, 0.22 μm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance.
High filtration flow rates; An inherently low affinity for proteins. IWT-ES10024, Sterile PTFE Syringe Filters, 0.22(μm), 13(mm), Hydrophobic, 100 pack.
Aug 4, 2008 Zefluor™ membrane now available in 0.5 µm pore size to meet NIOSH ... Typical Air Flow Rate ... PTFE Membrane Filter, 0.22um,.
3L Filters™ by Thermon has special expertise for nuclear, petrochemical, High efficiency, flow rate, dirt holding capacity & high pressure pleated ...
MS® PTFE Venting Filter Pore Sizes,um, 0.1, 0.22, 0.45,0.65,0.8,1.0,1.2 ... Air Flow Rate(PTFE 0.22 μm, 0.01 μm for air & gas), ≥25 L/min at 1 bar ...
Hydrophobic PTFE . membranes (typically 150 μm) with high porosity (about ... Flow Rate indicates initial flow rate at 10 psi using a KGS 47 filter.
DLX Series Capsule Filters are ready to use units for critical applications and small volume flows of gases and liquids.All filter units consist of a
DeltaMax Hydrophobic PTFE Membrane Filter adopts imported Hydrophilic PTFE High flow rate,low pressure loss, long service life; 100% integrity tested ...
PTFE Syringe Filters - Polytetrafluoroethylene Syringe Filters We have Best quality of PTFE syringe filters available ex stock in all sizes and micron sizes
High flow rates with minimal aqueous extractables (<0.3wt%); Optically clear when wet with water; Unlaminated; Ideal for HPLC and other mixtures of aqueous and
Fluoropore Membrane Filter 0.22 µm pore size, hydrophobic PTFE, Fluoropore™ membranes provide broad chemical compatibility, high flow rates and ...
Dia 2.7" 0.02 Micron EPDM Sealing HFPS High Flow PES Filter. High quality Dia 2.7" 0.02 Micron Micron Filters - Industrial Micron Filter Latest Price,.
Background Information, Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore®
