HIGH FLOW TETPOR II cartridges have been fully validated as 0.2 micron sterilizing grade filter cartridges, for compressed air and gas applications. They exceed liquid bacterial challenge levels as recommended by ASTM+. In addition, HIGH FLOW TETPOR II is also validated by aerosol bacterial and MS-2 Coliphage challenge testing.
Disc filters, syringe filters, extractors, and bottle top filtration devices have specified diameters for membrane filters. Flow rate: Defined as the time required for the flow stream to pass through the filter, flow rate is critical in determining how rapidly a filtration can be completed. Membrane material, thickness, porosity, and pore
Filson 0.2 micron PTFE filter has absolute micron rating of 0.2, therefore most particles larger than 0.2 micron will be removed. In addition, our 0.2 micron PTFE filter has a high filtration efficiency up to 99.99%, and you can get a overall lower cost than conventional filters. Material: Polytetrafluoroethylene ( PTFE) Micron Rating: 0.2 micron.
PTFE Unlaminated Membrane Filters, Hydrophilic, 0.2 Micron, 13mm, 100/Pk (H020A013A) Summary of Features: Maximum chemical and pH resistance High flow rates with minimal aqueous extractables (<0.3wt%) Optically clear when wet with water Unlaminated Ideal for HPLC and other mixtures of aqueous and organic solvents Applications:
Our LifeASSURE™ PFS Series PTFE Filter Cartridges combine flow-enhancing construction with a liquid‐validated, bacteria retentive, hydrophobic PTFE filter membrane, providing excellent air flow rates using small assemblies. Our filters are used for applications requiring 0.2 micronsterilization of air, gas, solvents and chemicals in life science industries.
PRESSURE DROP VS FLOW RATE Filter Media & Endcaps Polypropylene Max. Temp. Rating 180˚F ˚(82.2C) Max. Differential Pressure 75 PSID Single 10-inch element kPa 14 12 10 8 6 4 2 0 psid 2.0 1.6 1.2 0.8 0.4 0 Differential Pressure 0 2 4 6 8 10 0 5 10 15 20 25 30 35 Gallons/Minute Liters/Minute 2 micron 4 micron 12 micron 30 micron 45 micron 70
high-flow extended lifetime applications, these high-retention filters remove particles from a wide range of acids, bases, and other process chemicals. Fluorogard filters reduce setup time and increase system uptime, keeping operational costs at a minimum. The hydrophobic PTFE membrane increases surface area, improves flow, and minimizes
Water Flow Rate (L/min) 10 0.1 µm 04 61 81 0 12 4 Savana PTFE-HP 10” Cartridge Filters 30 25 20 15 10 5 0 GPM 2 0.2 µm 0.5 µm 1 µm 3 µm Di˜erential Pressure (kPa) Di˜erential Pressure (psid) 40 35 30 25 20 15 10 5 0 5 4 3 2 1 0 4 3 2 1 Air Flow Rate (SLPM) Savana PTFE 10" Cartridge Filters 0.2 µm (0.003 µm for Gas) Code 0 SCFM 0.6
MF-Millipore ® Membrane Filter, 0.22 µm pore size, 25 mm diameter, mixed cellulose esters (MCE) membrane, hydrophilic, white, 100 discs 0.22 μm pore size 75 % porosity Expand NY2004700 Nylon Net Filter, 20.0 um pore size, hydrophilic nylon membrane, 47 mm diameter 14 % porosity 20.0 μm pore size Expand GTTP04700
Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size 0.2 µm, Non-Sterile, Female Luer Lock, Male Luer Slip, Pack Size 500 Added to Shopping Cart Minisart ® Air with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12.
polytetrafluoroethylene (PTFE) membrane with additional polypropylene support layers and components. The HIMA retentive PTFE membrane offers superior hydrophobicity and water intrusion resistance compared to PVDF based media, and are more economical than all-fluorocarbon filters. Features and Benefits High flow rates and high
Choosing a filter does not have to be complicated – Corning has simplified the process. Just follow these four easy steps: Step 1: Match your application with the appropriate pore size. Step 2: Select the membrane and housing material for your application. Step 3: Select the correct membrane area to optimize flow rate and throughput.
The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situ steaming conditions in either the forward or reverse direction.
