Pall’s vent filters are self-contained, compact filter devices designed to provide high efficiency removal of airborne bacteria and particulate under dry and moist conditions to protect equipment, research results and laboratory environments.
Pall’s vent filters are self-contained, compact filter devices designed to provide high efficiency removal of airborne bacteria and particulate under dry and moist conditions to protect equipment, research results and laboratory environments.
Sterilizing Grade 0.2 MIcron PTFE Membrane CAPSULE Filter. Sterilizing Grade 0.2 Micron PES Membrane Filter Cartridge. SERENE Hydrophobic PTFE Sterilizing Grade 0.2um filter CAPSULES are highly retentive hydrophobic membrane designed for critical liquid and gas sterilization. Hydrophobic PTFE filter medium provides exceptionally high air flow
Below, we have provided information about several common micron ratings used in industrial strength filtration systems. (Note, micron ratings can range from 1 micron up to over 800 micron) Micron Sizes - Particle Size by Diameter 1 Micron = 1 Millionth of a Meter 1 Micron = 1 Thousandth of a Millimeter 1 Micron = 39 Millionth of an Inch (0.000039)
Vent filters function like standard syringe filters, but the built-in connection options make it easier to hook them up as part of a venting separation process. PTFE Vent Filter Options: Sterile or non-sterile Connections: 6 to 12 mm or 7 to 13 mm hose barbs 0.2 or 0.45 micron pore size 50 mm diameter Small Filter Device Resource Documents
PTFE membrane provides high flow rates and resists ‘wetting’ out by water vapor; Light, compact unit suitable for small vessels and flexible tubing; Can be easily integrity tested by water breakthrough test; Each filter labeled with an individual serial number; High-Quality Standards
Pall Acropak Filters Acropak 300 Ptfe 0.2um Pk3 Pall 12082. AcroPak 300 Capsule Filters High flow rate venting with 0.2um PTFE membrane sealed in polypropylene housing. Inlet/outlet hose connections are 6.4 to 12.7mm stepped hose barbs. Effective filtration area: 300cm2.
Typical Air Flow Rates 0.2 μm: 8 Lpm at 0.2 bar (20 kPa, 3 psi) 0.45 μm: 12 Lpm at 0.2 bar (20 kPa, 3 psi) 1 μm: 15 Lpm at 0.2 bar (20 kPa, 3 psi) Maximum Operating Temperature 130 °C (266 °F) at 1.0 bar (100 kPa, 15 psi) Maximum Operating Pressure 4.1 bar (410 kPa, 60 psi) at ambient temperature Dimensions Overall Length: 8.2 cm (3.2 in.)
The LabStrong FL0016-1 Final Filter is comparable to the Thermo Scientific Barnstead* D3750 Final Filter. The LabStrong 0.2 micron (µm) Final Filter is designed for use in ultrapure water purification systems. The final filter can be used with all Thermo Scientific Barnstead B-Pure*, E-Pure*. Compare this item.
Thermo Scientific Nalgene. Thermo Scientific Nalgene sterile syringe filters are ideal for sterilizing (0.2 micron) or clarifying biological solutions, such as cell culture and microbial media, reagents and additives, proteinaceous solutions, and buffers. PES (polyethersulfone) – Lowest protein binding and. Related Products: 25 Micron Filter.
Filter Media: PTFE on a polypropylene support Housing: Polypropylene Filter Diameter 50 mm Effective Filtration Area 19.6 cm2 Typical Air Flow Rates 0.2 μm: 8 Lpm at 0.2 bar (20 kPa, 3 psi) 0.45 μm: 12 Lpm at 0.2 bar (20 kPa, 3 psi) 1 μm: 15 Lpm at 0.2 bar (20 kPa, 3 psi) Maximum Operating Temperature 130 °C (266 °F) at 1.0 bar (100 kPa
PTFE Cartridges are well-suited for critical applications where superior flow and particle removal efficiency at 0.1 and 0.2 micron is required Sealing technology Thermal Bonding, No Adhesives, binders, or surfactants are used in the manufacturing process.
PTFE Unlaminated Membrane Filters, Hydrophilic, 0.2 Micron, 90mm, 25/Pk (H020A090C) Durable, efficient, and broadly compatible, these pure, hydrophilic PTFE membranes are ideal for use with HPLC seperations, aqueous/organic solvents, and many of your other filtration needs.
manufacture of PTFE membranes. This new generation of filter sets the standard with an unrivalled combination of efficiency, flow rate and strength. The HIGH FLOW TETPOR II is validated as a 0.2 micron sterilizing grade filter in liquids through ASTM F838-05 in gas through full retention to an aerosol challenge of MS2 phage. This ensures
FSM4000 is a robust flowmeter for heavy duty applications. It masters critical applications and conserves valuable resources with highly accurate measurement of process parameters in a wide range of industries. The turbine flow meter TR3 PP for chemicals for acids for aggressive media Volumetric flow rate: 5 l/min - 120 l/min
The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situ steaming conditions in either the forward or reverse direction.
