The polyethersulfone membrane offers high flow rates. Nonsterile syringe filters are excellent for HPLC applications. Each filter has a female Luer-lock inlet and a male slip Luer outlet. Ordering information: Nylon membrane filters 89041-306 are bulk packed in bags of 1000, four bags to a case.
Durapore™ PVDF Membranes: 0.22μ Pore Size provide high flow rates and throughput, low extractables, broad chemical compatibility and low protein binding. Available in diameters ranging from 13mm to 142mm. Composed of polyvinylidene fluoride (PVDF) that binds far less protein than than nylon, nitrocellulose or PTFE membranes.
Nov 15, 2017 · The sample solution was prepared by adding 20 mg of PHB sample to 10 ml of CHCl 3 and filtering with a 0.2 μm polyamide membrane filter. A PL-gel guard plus two mixed bed-B columns were used with a flow-rate of 1.0 ml/min at 30 °C. 3. Results and discussion3.1. Date seed oil extraction
EZFlow 13mm, 25mm, and 33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with polypropylene.
Membrane Solutions’new 17mm syringe filters have color-coding housings providing easy identification of membrane and porosity. Their enhanced luer-lock inlet provides secure connections and eliminates filter 'blow-off'. 17mm syringe filters supplied Nylon, PTFE, PES, MCE and PVDF which available in 0.22um, 0.45um pore sizes. 17 mm syringe filters (upper) offer up to 70% more filtration area
Never re-use a syringe filter, even if it looks perfectly flow rates. This prevents the build up of back pres- ... 09302101 Nylon high charge (positive) 0.2 150 ...
Minisart® SRP25 syringe filters. Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version K is a non-sterile pack of 50.
Phenex syringe filters are designed for efficient and rapid filtration of almost any solution prior to analysis, and are optimized for superior flow rates and high throughput. Proper membrane and size selection are the keys to choosing the best product to maintain the integrity of your sample components as well as to protect your system from
The filters have a very low level of protein adsorption, they are biocompatible, non-cytotoxic and have very small dead volumes and high flow rates. Their properties make Filtropur S, Filtropur S plus and Filtropur L filters with a pore size of 0.2 µm particularly suitable for the sterilisation of aqueous solutions.
Whatman ® Uniflo syringe filters are disposable filtration devices for removing solids from liquid samples prior to analyses such as HPLC and UV/Vis spectrophotometry. They are available in variety of membrane choices with 0.2 μm or 0.45 μm pore sizes, feature a polypropylene overmold housing, and include both sterile and non-sterile options.
Filters and Filtration. Filters and filtration products are used for applications requiring filtration or purification of a variety of samples. Products include bottle-top filters, filter units, concentrators, and a wide range of other filtration devices and supplies. Read more Read less.
Millipore Express® SHC 0.5/0.2 μm Capsule Filters Millipore Express ® SHC (Sterilizing-grade High Capacity) devices offer high performance and superior economics in a wide variety of sterilizing-grade filtration applications.
MS® CA Syringe filters are suitable for the filtration of aqueous solutions. Cellulose Acetate combine high flow rates and thermal stability with very low absorption characteristics. Especially 0.22μm pore size CA Membrane excellently suited for sterilization aqueous solutions, buffers, sera and media. PDF [ 6 Page / 1.004kb]
This extended capacity and service life can be directly translated into lower filtration costs. The EverLUX ® filter is also available in discs, capsules, high-capacity UltraCap ® and UltraCap ® H.D. capsules. Design Features. Absolute ratings from 0.1 µm to 0.6 µm; Unique, patented PES membrane with high flow rates and exceptional service
