Liquid flow rate tests are performed to ensure that the Acrodisc product meets Filter solvents through a 0.2 or 0.45 µm filter, such as a Pall Acrodisc® ...
Liquid flow rate tests are performed to ensure that the Acrodisc product meets Filter solvents through a 0.2 or 0.45 µm filter, such as a Pall Acrodisc® ...
High Air Flow Rate Venting Applications. Offers broad chemical compatibility with PTFE membrane and polypropylene housing; 100% integrity-tested to provide
higher air flow rates. Filter Area. Vent Filter. Low. Acro 37 TF Vents, Bacterial Air Vents. Medium. Acro 50 Vents. High. AcroPak 300 Capsule with PTFE
Pall Kleenpak Water Filters (KA2IN4) have been designed as 0.2 µm-rated liquid Typical flow rate measurements at various inlet water pressures.
The Pall Fluoryte™ High Flow Filter is an all fluoropolymer1 cartridge. Support and drainage: PTFE ... 1.0 μm, 0.45 μm, 0.2 μm, 0.1 μm, 0.05 μm.
Order Pall's 0.2-micron PTFE filter cartridge designed to remove Emflon PFAW cartridges are high capacity hydrophobic membrane filters designed for ...
Varafine filters are well suited for ultra high purity DI water applications together with extremely high flow rates, for economical installations.
The Pall FluoryteTM High Flow Filter is an flow rates and extended service life over ... Removal Rating. • 1.0 µm, 0.45 µm, 0.2 µm, 0.1 µm,. 0.05 µm.
High flow rates, low pressure drops These filters incorporate a double-layer (0.2 μm) of inherently hydrophobic, Pall-manufactured PTFE membrane.
These 100% integrity-tested filters feature high flow rate venting and aggressive solvent filtration. Polypropylene housing. The 0.2 µm PTFE membrane is
Pall. Cat No. Part. No. Description. Pkg. 28143-300. 4602. 0.2 µm, 13 mm. 75/pkg. 28143-302 membrane has high flow rates, high throughputs and.
Flow rates typically 2-3 times that of membrane filters make. HIGH FLOW The HIGH FLOW TETPOR II is validated as a 0.2 micron sterilizing grade filter in ...
The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single
Data Sheet E87c Fluoryte™ High Flow Filter Description The Pall Fluoryte™ High Flow options PTFE High Purity PFA PTFE FEP encapsulated fluoroelastomer, ...
All PTFE construction for compatibility with a wide Filter media: PTFE (fluoropolymer) ... µm. 1.0. µm. 10 µm. 25 µm. Flow rate (lpm), water at 20°C.
