TEM-500 Series Gas Filters. TEM 500 Series filters are specifically designed for filtration of semiconductor grade gasses where flow rates to 25 SCFM are required. This all welded asswmbly will deliver 0.003 micron absolute filtration where a high flow rate is required and space is small. This PTFE membrane cartridge is encapsulated in a 316L
PTFE Laminated Membrane Filters, 0.2 Micron, 142mm, 25/Pk Product code PTFE0214225 The pore size refers to the diameter of the individual pores in a membrane filter. Pore size is typically specified in micrometers (µm).
Millex Syringe Filter, Fluoropore PTFE, Hydrophobic, Non-sterile 0.20 µm pore size, 25 mm diameter, Millex-FG hydrophobic PTFE membrane - Find MSDS or SDS, a COA, data sheets and more information. Description Catalogue Number SLFG025NS Trade Name
Description of PTFE Membrane Filters PTFE membrane filter is made of polytetrafluoroethylene ultrafine fibers by hot-melt bonding together. Difference from glass fiber membrane, PTFE filter is a kind of membrane material for deep filtration.Membrane filter disc has the following characteristics: membrane filter 0.22 μm is produced from food-grade isotactic polypropylene.
Millex-LG, 0.20 µm A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Comes in a pack of 50. - Find MSDS or SDS, a COA, data sheets
Size:25mm Diameter, 0.2 Micron The Whatman PTFEmembrane filter is an excellent choice for use with aggressive solvents, liquids, and gases that can attack other membranes. It is resistant to most acids, alkalis, and solvents.
PTFE Filter 0.22 Micron Air Filter Cartridge [ Excellent chemical compatibility ] PTFE membrane got excellent chemical compatibility.It has good tolerance to various chemical and can be used for filtering kinds of corrosive liquids and gases.
The filter element features Pall’s advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situsteaming conditions in either the forward
0.2 Micron, 293mm, PTFE Unlaminated Membrane Filters. 10/Pk. PTFE Unlaminated. $628.92. + -. Add to Cart. Showing 1 to 6 of 6 entries. Our unsupported, hydrophobic, PTFE membrane filters are ideal for sterilization and venting applications involving air, gasses, and solvents/acids incompatible with most other filters.
The 0.5 μm pore size is normally used. Air and gas sterilization make use of the hydrophobic characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 μm and 0.5 μm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 μm membranes.
0.2 µm, AcroPak 300 Vent Filter Capsule with PTFE Membrane Offers broad chemical compatibility with PTFE membrane and polypropylene housing; 100% integrity-tested to provide the high level of confidence you require “Pall Laboratory products are designed for laboratory applications only.
These Corning® syringe filters have polypropylene copolymer housings, hose barb inlets and hose barb outlets. PTFE membranes provide the best chemical resistance These naturally hydrophobic membranes can be used for venting applications or filtering gases
The filter element features Pall’s advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situsteaming conditions in either the forward
PTFE Membrane Filter Cartridge UPTFE Series HIGH EFFICIENCY AND CONSISTENT FILTRATION Length – 9.75”, 10”, 20”, 0.01 , 0.02 micron ( for gases ) 80 deg C cycles at 121 deg C UNIVERSAL FILTRATION FILTER CARTRIDGE DATASHEET 1 1 2 ...
Micron rating ( µm ) : 0,1 – 1,2 µm Symmetric membrane Applications Sterile water filtration Open datasheet Sterile PTFE membrane gas filter ( SLF-T ) Permanently hydrophobic PTFE membrane Suitable for all integrity test procedures Pleated surface for high
