PTFE Laminated Membrane Filters, 0.2 Micron, 47mm, 100/Pk PTFE Laminated Membrane Filters, 0.20 micron, 47 mm, pack of 100. Hydrophobic, durable ePTFE laminated on to a polypropylene later. Ideal for venting, phase seperations, and aerosol sampling. SKU PTFE0247100 Manufacturer Sterlitech Pore Size 0.20 Diameter (mm) 47 Pack Size 100 $460.29
SLFG85010. Millipore. Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm. A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10. Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
Titan3 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 30 mm, with Pre-Filter, 100 Pk. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Titan3 PTFE (Hydrophobic) Syringe Filter 0.45 µm, 4 mm, 100 Pk.
PureFlo® Capsule Filters, Zenpure Americas Catalog Number: (76252-272) Supplier: ZENPURE AMERICAS C/O ST GOBAIN TE Description: PureFlo® Capsule Filter, Silicone O-Ring Retrieving Each TRIS, 1.0 M Buffer Solutions, 0.2 µm Filtered, Thermo Fisher Scientific Supplier: Thermo Scientific Chemicals Description: Liquid SDS Certificates
This 0.2 micron standard grade 2.7" x 30" filter cartridge with expanded PTFE membrane and a flat end cap offers high purity filtration. These polytetrafluoroethylene (PTFE) membrane cartridge provides superior chemical resistance for a range of applications. They also feature an encapsulated silicone O-ring gasket.
1. Airflow values calculated assuming linear relationship between volumetric airflow and differential pressure. 2. Water flows measured after prewetting with alcohol and calculated assuming linear relationship between flow and differential pressure. 3. Bubble points for 0.2µm, 0.45µm, and 3.0µm pore sizes measured using IPA; all others
Sterilizing Grade 0.2 Micron PES Membrane Filter Cartridge. SERENE Hydrophobic PTFE Sterilizing Grade 0.2um filter CAPSULES are highly retentive hydrophobic membrane designed for critical liquid and gas sterilization. Hydrophobic PTFE filter medium provides exceptionally high air flow rates at low differential pressures Naturally Hydrophobic Membrane also provides high assurance of filter integrity and long life, during high temperature venting application and during repeated steaming.
Emflon PFAW cartridges are high capacity hydrophobic membrane filters designed for reliable reduction of particles and microorganisms in compressed gas and vent applications. The filter element features Pall’s proprietary 0.2 micron polytetrafluoroethylene (PTFE) membrane, pleated to give high area in single open-end cartridges.
TF (PTFE) Membrane: Filter Media/Support: PTFE with PMP (polymethyl-pentene) support ring: PTFE on a polypropylene support: Typical Thickness: 1 μm: 76 μm (3 mils) 2 μm: 46 μm (1.8 mils) 3 μm: 30.4 μm (1.2 mils) 0.2 μm: 139 μm (5.5 mils) 0.45 and 1 μm: 135 μm (5.3 mils) Typical Air Flow Rate L/min/cm2 at 0.7 bar (70 kPa, 10 psi) 1 μm
Emflon PFRW filters have a microbial removal rating of 0.2 micron in liquids and a particulate removal rating of 0.003 micron in dry gases. Tested with Brevundimonas diminuta liquid challenge at ≥ 107 cfu/cm2 effective filtration area, according to ASTM Method 838-05. Provides sterile effluent according to FDA Guidelines (2004)
Find 0.2 micron syringe filters and related products for scientific research at MilliporeSigma. 0.2 µm pore size, hydrophilic PTFE, 0.4 mL volume, non-sterile ...
Thermo Scientific Nalgene. filters have the Rapid-Flow multi-column membrane-support system. This proprietary system provides a uniform, consistent separation between touchpoints with the membrane, minimizing gap stress to maintain optimal flow. 0.2 micron filters remove all bacteria 0.45 and 0.8 micron filters for.
Filter Membranes. Produced by the precipitation or stretching of polymeric materials, membrane filters are commonly used in both industry and research. Properties of membrane filters vary widely with differences in composition, surface treatments, and pore size. Selecting the ideal filter requires an understanding of basic characteristics.
OMNIPORE PTFE 0.2 µm, WH PL 47 mm Compare this item MILLEX® Sterile Syringe Filters Hydrophilic PTFE Membranes MilliporeSigma A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50 Related Products: Hydrophilic Ptfe
PTFE Laminated Membrane Filters, 0.2 Micron, 142mm, 25/Pk PTFE Laminated Membrane Filters, 0.20 micron, 142 mm, pack of 25. Hydrophobic, durable ePTFE laminated on to a polypropylene later. Ideal for venting, phase seperations, and aerosol sampling. SKU PTFE0214225 Manufacturer Sterlitech Pore Size 0.20 Diameter (mm) 142 Pack Size 25 $498.10
