Jun 01, 2011 · Midisart 0.45 μm filters have a minimum bubble point of 0.9 bar, and 0.2 μm filters have a minimum bubble point of 1.4 bar. Figure 2 shows the individual results of the trials where the 0.45 um
Jun 01, 2011 · Midisart 0.45 μm filters have a minimum bubble point of 0.9 bar, and 0.2 μm filters have a minimum bubble point of 1.4 bar. Figure 2 shows the individual results of the trials where the 0.45 um
Filter Media: FluoroTrans PVDF. Pore Size: 0.2 µm. Type: Transfer Membrane. Roll Size Length: 26 cm. Roll Size Width: 3.3 m. Typical Thickness: 127 µm. Use: Nucleic acid/Protein detection. Pall® Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other
PTFE (Polytetrafluoroethylene) capsule filters are highly stable, chemically inert and naturally hydrophobic. These PTFE capsule filters are desinged for the filtration or larger volume organic solvents and aggressive chemical solutions. We offer them with filtration areas ranging from 500cm2 to 2000cm2.
Nylon Membrane Filters Diameter 47 mm Pore Size 0.22 μm Laboratory Filtration Membrane by Allpure Biotechnology [Pack of 100] (Nylon, 0.22 um) Misc. $35.98 $ 35 . 98 ($3.60/10 Items)
ePTFE liquid filtration composite material is product which combines ePTFE membrane composited on a PET or PP substrate as a carrier, and then the original hydrophobic angle is modified to 122℃ by special chemical and physical modification, so that the membrane has liquid and can be intercepted by particles above 0.1um，with a high intercept rate
Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm, A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10. Comes in a pack of 10. Expand
Filtration unit: polypropylene sterilized by gamma irradiation; Mixed Cellulose Ester Membranes Mixed Cellulose Ester Membranes with a pore size of 0.2 or 0.45 μm and membrane diameter of 47 mm are used for monitoring contaminants in liquid samples from raw materials to finished products.
Whatman™ Puradisc 13mm Syringe Filters: Nonsterile are chemically stable and inert hydrophobic membranes mainly for filtration of non-aqueous samples. Pricing and Availability. Cytiva Whatman™ Anotop™ 10 Sterile Syringe Filters. Hold-up volume: <30μL (10mm size), <200μL (25mm) Pricing and Availability.
PTFE Unlaminated Membrane Filters, 0.2 micron, 25mm, 50/pk Product code PTU022550
company introduction Huzhou sen nuo fluorine material technology co., LTD. Is a company specializing in the production of bulk ptfe microporous membrane and the related composite products of high-tech enterprises, the company is located in northern zhejiang province, east of Shanghai Hangzhou in the south, the west according to the taihu lake in the north, and wuxi Suzhou on the other side of
ePTFE liquid filtration membrane is made of PTFE resin as a raw material, and is made into a polytetrafluoroethylene hydrophobic film by a special process and biaxial stretching, and then the original hydrophobic angle is changed to 34 ° C by special chemical and physical modification, thereby the membrane has the characteristics that the liquid can pass through a particle having a high
Buy membrane filter roll stock from a large selection of material types, microns and szes. Also custom laser cut to your specifications.Stock ships in one day from our high quality facility., Pore Size: 0.2um
The Midisart® filter family is the clear choice for small scale sterile air/gas filtration applications. Sartorius offers two Midisart® variants that perfectly match all requirements: Midisart® 2000. The most popular. Reliable performance since decades. Hydrophobic PTFE membrane; Liquid bacteria challenge test; Autoclaving (max. 60 cycles)
1. Free Ground Shipping (Shipping Discount) is applied to selected products only. 2. This discount expires on the 31 st December 2021. 3. This discount applies to online credit card orders only from shop.pall.com. 4. This discount is applicable for the Pall Laboratory range filters available for sale on Pall eShop (shop.pall.com). 5.
Introduction Cartridge filter media is a hydrophobic PTFE membrane, applicable to pre-filtering of gas and solvent and sterilization. Its hydrophobicity is 3.75 times stronger than the erosion resistance capability of ordinary PVDF; thus, filters are applicable to pre-filtering and precise filtration of gas and solvent sterilization.
