Common use ptfe membrane filter 0.22 um for hplc

Item Syringe Filter Membrane Dia. 13 mm Pore Size 0.22 um Capacity 10mL Filter Material Hydrophobic PTFE Housing Material Polypropylene Inlet Connection Luer-lok(TM) Outlet Connection Luer-slip (no- barb) Max. Pressure 90 bar For Use With Liquids

to filter most HPLC and GC fluids/solvents. PTFE can also be used to filter air or gases. Nylon is good for DMSO. PES and CA/SFCA membranes are compatible with non-alcoholic aqueous solutions and are most often used for sterile filtration of culture media

The PTFE Syringe Filter in the picture has an aperture of 0.22, an outer diameter of 25mm, and a purple color. Aijiren also offers many other colors of Syringe Filter, such as yellow, pink, blue, green, etc. Customers can choose according to their preferences .

PTFE Membrane Filter Filter Media PTFE Wettability Hydrophobic Pore size 0.22, 0.45 View Complete Details Ask Latest Price & Details PVDF Membrane Filter Pore Size 0.22~80 Um, 0.22~90 Um, 0.22~100 Um

Product DescriptionSyringe filter is a cost-effective way to improve the quality of HPLC analysis, improve consistency,..Product DescriptionSyringe filter is a cost-effective way to improve the quality of HPLC analysis, improve consistency,

PTFE membrane filters have an excellent chemical compatibility (pH 1 to 14), so that they are also used for the filtration of solvents and acids, to which other filter types are not resistant. Moreover they can be used to filter aqueous solutions as well, but because of their hydrophobic characteristics, they must be pre-wetted with ethanol or methanol before the filtration of

PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with

Minisart® SRP15 Syringe Filter 17558----------K, 0.2 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17558 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration and has a male spike outlet.

Hawach WINSTAR 0.22 um hydrophilic disposable PTFE syringe filters have a wide range of pore size and work well for cleaning small volume samples for HPLC or GC. Hawach WINSTAR PTFE-L syringe filters with pore size of 0.22μm are golden, and syringe filter

Solvent Inlet Filter found in: SOLVENT INLET FILTER 20u, Solvent Inlet Filters, Solvent Inlet Filter 20um, 2/pack, Solvent Inlet Filter for Aijiren HPLC.. Class VI PTFE Manifold, chemically resistant Viton O-Ring & an Air Inlet Valve combined with a Foxx 25mm, 0.2µm PTFE Filter for safe vapor filtration. for safe vapor filtration.

Acrodisc® Syringe Filters with PTFE Membrane - 0.2 µm, 13mm, male slip luer outlet (100/pkg 300/cs) Product ID: 4423. Product ID. 4423. Unit of Measure.

Durapore® Membrane Filter, 0.22 µm. Background Information. Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes. Features & Benefits.

Air and gas sterilization make use of the hydrophobic characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 μm and 0.5 μm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2

Cytiva Whatman Polycap TF filters are made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing for use with organic solvents and chemically aggressive solutions. PTFE filter membrane is resistant to most0.2,

Phenex Syringe Filters, HPLC syringe filters, GC syringe filters, PTFE syringe filters, nylon syringe filters Phenex syringe filters are designed for efficient and rapid filtration of almost any solution prior to analysis, and are optimized for superior flow rates and high