Target2 PTFE Syringe Filters are used for general biological filtration. They are especially well-suited for applications where high protein recovery is desired. Product Overview Recommendations Documents Showing 7 of 7 Add to cart Target2 Syringe Filters are an ideal choice for general purpose laboratory use.
** For high load and particulate-laden samples you may consider placing a Glass Fiber (GF) prefilter, either integrated with the membrane as one unit (Phenex- GF/NY or -GF/CA) or in series with the membrane syringe filter of your choice. Generally, 0.45 μm porosity filters are used to remove particulates from samples and mobile phase solutions.
Find syringe filters 0.2 um for solvents and related products for scientific research at MilliporeSigma
Technical Support Customer Service. Thermo Scientific™ Nalgene™ syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications. Whether your research necessitates prefiltration
Feb 17, 2020 · PTFE Hydrophilic Syringe Filters 0.2 or 0.45um Resisting nearly all corrosive chemicals makes PTFE syringe filters an ideal choice. However, natural hydrophobic PTFE has it’s disadvantages not letting aqueous solutions passing through while many of these chemicals are diluted with water.
Pall non-sterile syringe filters with PTFE membrane are ideal for use in the filtration of gas or organic solvents. PTFE syringe filters have been widely used for the sample preparation applications, removing particulate contamination and protecting HPLC systems and columns. Overview Order Products Description Documents Applications Specifications
Solutions containing a known concentration of either 0.24 μm or 0.5 μm particles were filtered using 0.45 μm hydrophilic PTFE syringe filters and particle concentration in the final filtrate was measured to determine the average particle retention for each filter.
(without excessive force) the filled syringe to the filter device with a twisting motion. Apply gentle pressure to begin filtration. (A gentle pressure helps assure maximum throughput.) CAUTION: As the filter removes particulate, filtration will become more difficult (the syringe plunger will be harder to use) and pressure will rapidly increase on
The 25 mm device, Acrodisc One™ syringe filter with wwPTFE membrane, sets the standard for HPLC/UHPLC analytical filtration. It can extend the life of a HPLC column by up to 52 times over unfiltered samples. Effects of filters on HPLC column life following injections of unfiltered and filtered 0.05% latex sphere suspensions.
What membrane filter pore size should I use for sterilization? Regardless of the membrane filter material, always use a 0.2 µm pore size membrane filter as the final filter for any sterilizing filtration. The 0.2 µm membranes used in Thermo Scientific™ Nalgene™ filters have been tested and shown to retain 100% of a challenge of 1 X 107
Syringe filters are used in analytical chemistry applications to remove particulate contamination prior to analysis. Filtering a sample prior to sample injection into analytical instrumentation will help protect sensitive parts of the instrument from particulate build-up and reduce system downtime.
Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Color: Transparent Blue: Description: Titan3 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 17 mm, 200 Pk. Disposable: Yes: Material: PTFE (Hydrophobic) Material (Membrane) PTFE (Hydrophobic) Pore Size
Target Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Description: Target 2 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 30 mm, 100 Pk. Material: PTFE (Hydrophilic) Pore Size: 0.2 μm: For Use With (Application) HPLC, SPE: Housing Material: Medical Grade, Solvent-Resistant, Virgin Polypropylene: Pressure Rating
** For high load and particulate-laden samples you may consider placing a Glass Fiber (GF) prefilter, either integrated with the membrane as one unit (Phenex- GF/NY or -GF/CA) or in series with the membrane syringe filter of your choice. Generally, 0.45 μm porosity filters are used to remove particulates from samples and mobile phase solutions.
