Hydrophobic PTFE Membrane Filters ตัวกรองเมมเบรน. Use to sterilize gasses, vent gas from aqueous solutions, or sterilize or clarify aggressive chemicals
Hydrophobic PTFE Membrane Filters ตัวกรองเมมเบรน. Use to sterilize gasses, vent gas from aqueous solutions, or sterilize or clarify aggressive chemicals
membranes (typically 150 µm) with high porosity (about. 80%) provide high gas and liquid flow per unit area. High porosity also provides high surface area
Emflon PFRW cartridges are sterilizing grade hydrophobic membrane filters 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, ...
PTFE membrane with supporting layer polyester or polypropylene can effectively filtrate microorganism and other particulates; Membrane Solutions PTFE
raw materials are used to produce Advantec membranes. 0.22 = 022 ... Hydrophobic Gas venting. Non-aqueous. PTFE. Clarify or sterilize solvents.
Uniformly thin membranes (typically 150 μm) with high porosity (about 80%) provide high gas and liquid flow per unit area. High porosity also provides high
0.22um PTFE Filter. The Latest Update of PTFE Membrane Filter. disc filter ptfe 0.2 micron filter for petrochemicals. hydrophobic PTFE 0.2 micron filter for
Advantec membranes are produced by three different processes. Mixed Cellulose Esters and Cellulose Acetate, are reverse phase solvent cast membranes, where
Results 1 - 30 of 1383 Filter Membrane Application FG 0.2 µm hydrophobic PTFE ... membrane Available in 0.1, 0.22, 0.45, 0.65, and 5.0 micron (µm) sizes.
Applications: Sterilize gases and trap aqueous aerosols. Protect vacuum pumps by allowing gases to pass freely while blocking aqueous liquids.
Categories · Polyethersulfone (PES) Membrane Capsule Filters - CCS · PTFE Membrane Capsule Filter · Polypropylene Membrane Capsule Filter · Glass Fiber Capsule
URL http://www.advantecmfs.com. CATALOG•Volume15 PTFE Capsule Filters – Hydrophobic (CCF) and ... membranes (typically 150 μm) with high porosity (about.
Advantec MFS A045F047A, Membrane Filter with Pad, Sterile, Grid, 47 mm Diameter, Mxmoonfree PTFE Membrane Filter, 0.22um Pore Size, 47mm Diameter ...
When used in venting applications, they allow the gases to pass freely while blocking NOTE: Hydrophilic PTFE membrane filters are not autoclavable.
Membrane filter, hydrophobic PTFE, PP laminated to one side to improve handling, 13mm Ø, pore size 0.10µm, white. Max. temp. 130 °C. Sterilize gases by
