13mm ptfe 0.2 micron filter for solvents

Ideal for filtration of gas and/or organic solvents. The Acrodisc PSF GxF syringe filter provides two to four times the throughput of standard prefilter 

PTFE Capsule Filters – Hydrophobic (CCF) and PTFE with solvents supported ... 0.2 µm. A typical serial stack incorporating Prefilters,.

Puradisc 13 mm Syringe Filters are designed to provide clean fil- PTFE. Organic based samples; hydrophobic membrane. H-PTFE. Solvents, chemicals ...

Acrodisc® Syringe Filters with PTFE Membrane - 0.2 µm, 13mm, male slip luer. Product image is a representative example for illustration purposes.

Red PTFE (Hydrophilic) Syringe Filters, 0.22 µm, 13 mm Choice of 13 mm or 25 mm syringe filter diameter; choice of 0.2 μm or 0.45 μm pore size.

behind the ultrafiltration membrane to draw solvents and 0.2 µm. 100. VS0172. Visit us at www.sartorius.com/Vivaspin500 to get additional info.

biological fluids and gases is usually done with 0.2 or 0.22 µm pore filter membranes. PTFE. 0.2. Ideal for filtering solvents and gases. Vacuum Filter.

Can be used with both aqueous solvents and aggressive organic solvents. Suitable for sample preparation for high performance and ultra-high performance liquid 

Acrodisc® Syringe Filters with PTFE Membrane - 0.2 µm, 13mm, male slip luer. Product image is a representative example for illustration purposes.

Filtration for aqueous sample and some organic solvents strong acid solvent filtration ... PC membrane filter, Diameter: 13mm, Pore Size:0.2μm.

Each field has very different requirements for the filters and the choice of filter type can depend upon the solvent being filtered, the size of particles that 

By using CHROMAFIL syringe filters unwanted particles are removed which can otherwise cause Syringe filters, labeled, CHROMAFIL Xtra PTFE, 13 mm, 0.2 µm.

0.2 and 0.45 μm. Membrane diameters 13 mm, 25 mm und 30 mm. Technical Data: Filter material: PTFE ... Type: PTFE 0.2 μm, non-sterile. SPT02013100, 13 mm ...

Pore sizes of 0.1 µm, 0.2 µm. • Cost-effective alternative to PTFE. • Wide chemical and solvent compatibility. Typical Applications. • Solvents, chemicals.